19 Apr
2005
19 Apr
'05
1:02 p.m.
Hi all,
I've tested the new code but now the problem is worst after the change....the rpid HF
in outgoing INVITE is ever wrong (missing some digits) and the gateway is unable to
understood the RPID HF....in my ser.cfg I've only this line related to RPID handling
(before t_relay()):
append_rpid_hf("<",
">;party=calling;id-type=subscriber;screen=yes;privacy=off");
Here a ngrepped log where the actors are:
A.B.C.D: IP_address_SER
E.F.G.H: calling_ATA
K.X.Y.Z: gateway_Cisco
U E.F.G.H:5060 -> A.B.C.D:5060
INVITE sip:05751944945@my.sip.domain SIP/2.0.
Via: SIP/2.0/UDP E.F.G.H:5060;branch=z9hG4bK72757e5898649d225fbab82c5b090092.
Proxy-Authorization: Digest
username="0662293701",realm="my.sip.domain",nonce="4264fd7095fad869d82db77f8760f99a194081be",uri="sip:05751944945@my.sip.domain",response="af95e0eb4634f403312d1543713af228",cnonce="1baf129b",qop="auth",nc="00000021".
Max-Forwards: 70.
From:
"0662293701"<sip:0662293701@my.sip.domain>;tag=ttf2004-2027030565-4e3430a3-1528472774.
To: <sip:05751944945@my.sip.domain>.
Contact: "0662293701"<sip:0662293701@E.F.G.H:5060>.
Call-ID: 4F6F-4259-8014290-8CB71C2226CD-0027(a)E.F.G.H.
CSeq: 33 INVITE.
Allow:INVITE,ACK,OPTIONS,BYE,CANCEL,REGISTER,INFO,PRACK,REFER.
Content-Disposition: session.
Content-Encoding: identity.
Content-Language: en.
Content-Length: 223.
Content-Type: application/sdp.
Expires: 180.
Supported: replaces.
User-Agent: ttf2004.
.
v=0.
o=0662293701 2489050800 1 IN IP4 E.F.G.H.
s=Session SDP.
c=IN IP4 E.F.G.H.
t=0 0.
m=audio 5002 RTP/AVP 8 18 101.
a=rtpmap:8 PCMA/8000.
a=rtpmap:18 G729/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
#
U A.B.C.D:5060 -> E.F.G.H:5060
SIP/2.0 100 trying -- your call is important to us.
Via: SIP/2.0/UDP E.F.G.H:5060;branch=z9hG4bK72757e5898649d225fbab82c5b090092.
From:
"0662293701"<sip:0662293701@my.sip.domain>;tag=ttf2004-2027030565-4e3430a3-1528472774.
To: <sip:05751944945@my.sip.domain>.
Call-ID: 4F6F-4259-8014290-8CB71C2226CD-0027(a)E.F.G.H.
CSeq: 33 INVITE.
Date: Tue, 19 Apr 2005 12:40:36 GMT+01:00.
Server: SPSexp (0.9.1 (i386/linux)).
Content-Length: 0.
Warning: 392 A.B.C.D:5060 "Noisy feedback tells: pid=2511 req_src_ip=E.F.G.H
req_src_port=5060
in_uri=sip:05751944945@my.sip.domainout_uri=sip:49105751944945@K.X.Y.Z:5060
via_cnt==1".
.
#
U A.B.C.D:5060 -> K.X.Y.Z:5060
INVITE sip:49105751944945@K.X.Y.Z:5060 SIP/2.0.
Record-Route: <sip:A.B.C.D;ftag=ttf2004-2027030565-4e3430a3-1528472774;lr=on>.
Via: SIP/2.0/UDP A.B.C.D;branch=z9hG4bKfc13.4b9ec207.0.
Via: SIP/2.0/UDP E.F.G.H:5060;branch=z9hG4bK72757e5898649d225fbab82c5b090092.
Max-Forwards: 16.
From:
"0662293701"<sip:0662293701@my.sip.domain>;tag=ttf2004-2027030565-4e3430a3-1528472774.
To: <sip:05751944945@my.sip.domain>.
Contact: "0662293701"<sip:0662293701@E.F.G.H:5060>.
Call-ID: 4F6F-4259-8014290-8CB71C2226CD-0027(a)E.F.G.H.
CSeq: 33 INVITE.
Allow:INVITE,ACK,OPTIONS,BYE,CANCEL,REGISTER,INFO,PRACK,REFER.
Content-Disposition: session.
Content-Encoding: identity.
Content-Language: en.
Content-Length: 223.
Content-Type: application/sdp.
Expires: 180.
Supported: replaces.
User-Agent: ttf2004.
Remote-Party-ID:
<sip:06..293701@my.sip.domain>;party=calling;id-type=subscriber;screen=yes;privacy=off.
P-hint: Call_From_Postpaid_User.
.
v=0.
o=0662293701 2489050800 1 IN IP4 E.F.G.H.
s=Session SDP.
c=IN IP4 E.F.G.H.
t=0 0.
m=audio 5002 RTP/AVP 8 18 101.
a=rtpmap:8 PCMA/8000.
a=rtpmap:18 G729/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
Any suggestions?
Regards,
Verbal
----- Original Message -----
From: "Bogdan-Andrei Iancu" <bogdan(a)voice-system.ro>
To: "SER developer mailing list" <serdev(a)lists.iptel.org>
Cc: "serusers" <serusers(a)lists.iptel.org>
Sent: Tuesday, April 19, 2005 1:12 PM
Subject: [Serdev] Auth* changes
I just committed some changes into 0.9.0 auth* modules
- basically it's
just a backport from the development branch.
Mainly to solve some issues regarding the RPID handling (there were
quite some reports about RPID problems in 0.9.0), which was one of the
last drawbacks before 0.9.0 release.
Interface changes:
auth_db:
param "load_credentials": list of '|' separated columns to be load
from subscriber table at auth time. The values for each column is loaded
in a corresponding AVP (string type) with same name as the column;
Default value is "rpid". Empty value "" disable this feature.
auth:
param "rpid_avp": avp name (string) which carry the RPID value -
must be synchronized with auth_db if RPID is fetched from DB. Default
value is "rpid".
Please all 0.9.0 users, give it a try a report any potential problems.
bogdan
_______________________________________________
Serdev mailing list
serdev(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serdev