Re: [Serusers] SER with pa module including publish (ERROR)

Hi again, I tried to startup SER deleting the first line of ser.cfg but it didn't work (similar problem). However I installed the 0.8.14 SER version and there was no problem in starting up the SER with the previous failing ser.cfg. ¿any other idea? Thanks for your answers Jesús P.D.- The ser.cf used is included down here. I put comments on the proper function (handle_subscription, for example) of 0.10. pa module version to start it up properly with 0.8.14 version. #################################################################### # global configuration parameters a debug=7 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=yes # (cmd line: -E) #memlog=5 # memory debug log level #log_facility=LOG_LOCAL0 # sets the facility used for logging (see syslog(3)) /* Uncomment these lines to enter debugging mode */ fork=no log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" #user=ser #group=ser #fifo_user=ser # owner of the ser fifo #fifo_group=ser #fifo_mode=0660 # fifo's permissions #disable_core=yes #disables core dumping #open_fd_limit=1024 # sets the open file descriptors limit #mhomed=yes # usefull for multihomed hosts, small performance penalty #disable_tcp=yes #tcp_accept_aliases=yes # accepts the tcp alias via option (see NEWS) # # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/pa.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- pa params -- # #modparam("pa", "default_expires", 3600) #Set default_expires parameter #modparam("pa", "default_priority_percentage", 50) #Set default_priority_percentage parameter #modparam("pa", "db_url", "mysql:ser:heslo@localhost/ser") #Set db_url parameter #modparam("pa", "pa_domain", "hi.inet") #Set pa_domain parameter # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; #if (!uri=~"hi.inet" { # mark routing logic in request # append_hf("P-hint: outbound\r\n"); # route(1); # break; #}; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"hi.inet") { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("hi.inet", "subscriber")) { www_challenge("hi.inet", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri=~"hi.inet") { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; if (method=="PUBLISH") { if (!t_newtran()) { log(1, "newtran error\n"); sl_reply_error(); }; #handle_publish("registrar"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }