Daniel-Constantin Mierla wrote:
There is presence_mwi that should be able to handle the event 'message-summary'. However, if you don't get the presence working for two x-lite softphones, the error is somewhere else -- the above message does not affect the SIMPLE status presence part.
Yeah - Shortly after I sent my message we fired up wireshark to figure out that there was a rouge Polycom phone sending us MWI indications, which we were not expecting. I knew something odd was happening just wasn't sure exactly what until we were able to sniff the wire.
The 'tab' is printed from the C sources, in the debug message, it is not the cause for the issue.
Ok - good to know.
You have to watch the SIP traffic and see if the SUBSCRIBEs and PUBLISHes are replied properly. Then check if after a PUBLISH a NOTIFY is issued.
OpenSER is sending what looks to be a properly formatted NOTIFY, however we always getting back a 481 Call Transaction Does Not exist from X-Lite to OpenSER's presence NOTIFY message.
We are setting up SJPhone and a Polycom phone to see if we get any different behavior.
Are we missing something in the config I sent previously?
Thank you,
Jeremy