[Serusers] forwarding to pstn

Hi all, I set up ser + asterisk. Asterisk is registred as gateway(a)home.net and listen port 5070 (same box). two hard phones are registred as bob(a)home.net and alice(a)home.net . from alice or bob i want to call 01013 to PSTN without success. ser lookup location and aliases and so reply not found thought i set forward ? Thanks for your help Harry # ----------- global configuration parameters ------------------------ debug=5 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode #debug=7 #fork=no #log_stderror=yes */ check_via=no # (cmd. line: -v) dns= no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.0.1 alias="home.net" #alias="192.168.0.1" port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/group.so" loadmodule "/usr/lib/ser/modules/uri.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("15")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("home.net", "subscriber")) { www_challenge("home.net", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB or ALIASES if (!lookup("location") | !lookup("aliases")) { sl_send_reply("404", "Not Found"); break; }; } else { t_relay(); }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; # forward to PSTN if (uri=~"sip:01013@home.net") { if (method=="INVITE") { route(1); break; }; }; } route[1] { # forward to PSTN if (uri=~"sip:01013@home.net") { if (method=="INVITE") { forward(192.168.0.1, 5070); break; }; }; } Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/