Re: [OpenSER-Users] Wrong R-uri in ACK

Looks like the Hipath is totally buggy. As a workaround you could try: - make a on_reply route - if reply == 200 OK, copy the content of the Contact header into a Record-Route header which will be added on top of the existing header (insert_hf(txt)). This should allowsx openser to route the ind-dialog message correct. Now it depends if the callee accepts the request with the additional Route header, but most clients do not care about received Route headers thus it should work. Of course you also should report this bug to Siemens. regards klaus Lucio Maciel schrieb: > Ok, here are some snips of the call > > > Here is the initial invite that I receive from the client... > > client -> openser > <cut> > INVITE sip:02188889999@tesatelecom.com SIP/2.0 > From: username01 <sip:username01@tesatelecom.com>;tag=a8ced7257fddfcc > To: sip:02188889999@tesatelecom.com > Via: SIP/2.0/UDP 192.168.0.61:5060;rport;branch=z9hG4bK0631b8ccb > Call-ID: 76b50f94a009c40 > CSeq: 2138284261 INVITE > Max-Forwards: 70 > Content-Length: 281 > Route: <sip:ip_of_tesatelecom.com:5060;lr> > Allow:INVITE,ACK,OPTIONS,BYE,CANCEL,REGISTER,INFO > Content-Type: application/sdp > Contact: sip:username01@192.168.0.61:5060 > Supported: replaces > User-Agent: HiPath 3000 V7.0 M5T SIP-UA SAFE/v3.6.6.10 > sdp follows.... > </cut> > > I forward this to my pstn gateway, and that is the 200 OK that I forward > back to the client. > > gw -> openser -> client > <cut> > SIP/2.0 200 OK > Via: SIP/2.0/UDP > 192.168.0.61:5060;received=xxx.xxx.xxx.xxx;rport=5060;branch=z9hG4bKd97a7e313 > Record-Route: > <sip:ip_of_tesatelecom;lr=on;ftag=a8ced7257fddfcc;nat=yes;did=fdf.0c5df845> > From: username01 <sip:username01@tesatelecom.com>;tag=a8ced7257fddfcc > To: <sip:02188889999@tesatelecom.com>;tag=5514406-tdb1077288600 > Call-ID: 76b50f94a009c40 > CSeq: 2138284262 INVITE > Server: PSTN Gateway > Contact: <sip:552188889999@ip_of_gateway:5060;transport=udp> > Content-Type: application/sdp > Content-Length: 179 > sdp follows... > </cut> > > And now the ACK for the 200ok > client-> openser > <cut> > ACK sip:02188889999@tesatelecom.com SIP/2.0 <- back uri > From: username01 <sip:username01@tesatelecom.com>;tag=a8ced7257fddfcc > To: <sip:02188889999@tesatelecom.com>;tag=5514406-tdb1077288600 > Via: SIP/2.0/UDP 192.168.0.61:5060;rport;branch=z9hG4bK9ea89fe86 > Call-ID: 76b50f94a009c40 > CSeq: 2138284262 ACK > Max-Forwards: 70 > Content-Length: 0 > Route: > <sip:ip_of_tesatelecom;lr=on;ftag=a8ced7257fddfcc;nat=yes;did=fdf.0c5df845> > User-Agent: HiPath 3000 V7.0 M5T SIP-UA SAFE/v3.6.6.10 > </cut> > > The r-uri in the ack is wrong, it should be the contact from the 200ok, > and i can't route it to the rigth gateway. > > So, there is some way that i can workaround this in openser?? Since is > very unlikely that the client will fix this issue. > > Thanks > > > On Tue, 2008-03-25 at 00:54 +0800, Bai Shi wrote: >> Could you provide more information? Who is issuing ACK and which is not changed? After t_relay by Openser? >> Rgds, >> BS >> >> -----Original Message----- >> From: users-bounces(a)lists.openser.org [mailto:users-bounces@lists.openser.org] On Behalf Of Lucio Maciel >> Sent: 2008年3月24日 23:13 >> To: users(a)lists.openser.org >> Subject: [OpenSER-Users] Wrong R-uri in ACK >> >> Hi... >> >> I'm getting some wrongs ruri's in the ACK for a final 200ok from an >> INVITE... >> >> It is comming as the original INVITE r-uri (number@host) and not the >> contact from the 200ok. >> >> There is something i can do to workaround this in openser? >> >> Thanks. >> >> > > > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users