2 Apr
2007
2 Apr
'07
9:54 a.m.
Thank you.
I will check that configuration. In fact, I use mediaproxy instead of RTP proxy.
So maybe I can optimize it for mediaproxy.
Thanks,
ilker
-----Original Message-----
From: Ladislav Andel [mailto:ladaan@iptel.org]
Sent: Monday, April 02, 2007 4:52 PM
To: İlker Aktuna (Koç.net)
Cc: serusers(a)iptel.org
Subject: Re: [Serusers] problem with compiling the new CVS release
Hi İlker,
there is no simple config out yet. Look at
http://www.iptel.org/ser/howtos/optimizing_the_use_of_rtp_proxy
In this document it is more complex but you might be able to see how to configure it for
simple setup.
I'm author of the document and am preparing a new revision which will be out soon. I
will include a simple config too.
Lada
İlker Aktuna (Koç.net) napsal(a):
Hi Lada,
Thanks for your reply.
In my sample configuration I have the following line which is rejected by the registrar
module.
modparam("registrar", "nat_flag", 6)
I got the sample from :
http://siprouter.onsip.org/doc/gettingstarted/ch08.html
What can I use instead of this line ?
If a newer configuration is needed, can you point me to a simple configuration which is
specially created for NAT clients with mediaproxy.
Kind Regards,
ilker
-----Original Message-----
From: Ladislav Andel [mailto:ladaan@iptel.org]
Sent: Monday, April 02, 2007 2:48 PM
To: İlker Aktuna (Koç.net)
Cc: Vaclav Kubart; serusers(a)iptel.org
Subject: Re: [Serusers] problem with compiling the new CVS release
In Ottendorf registrar module are parameters: save_nat_flag and
load_nat_flag
in ser.cfg it could be defined for example:
modparam("registrar", "save_nat_flag", "FLAG_NAT_UAC")
modparam("registrar", "load_nat_flag", "FLAG_NAT_UAS")
Lada
İlker Aktuna (Koç.net) wrote:
_____________________________________________________________________________________________________________________________________________
Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta
mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli
dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz
ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi
bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji
viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta
mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini
garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez.
This message is intended solely for the use of the individual or entity to whom it is
addressed , and may contain confidential information. If you are not the intended
recipient of this message or you receive this mail in error, you should refrain from
making any use of the contents and from opening any attachment. In that case, please
notify the sender immediately and return the message to the sender, then, delete and
destroy all copies. This e-mail message, can not be copied, published or sold for any
reason. This e-mail message has been swept by anti-virus systems for the presence of
computer viruses. In doing so, however, sender cannot warrant that virus or other forms
of data corruption may not be present and do not take any responsibility in any
occurrence.
_____________________________________________________________________________________________________________________________________________
Thanks, by excluding some modules (unixsock
postgres bdb oracle osp) it compiles now.
However, this version also does not include the "nat_flag" parameter in module
registrar:
0(5917) set_mod_param_regex: parameter <nat_flag> not found in
module <registrar>
Where can I find a version which supports this parameter and can be compiled ?
Regards,
ilker
-----Original Message-----
From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org]
Sent: Monday, April 02, 2007 1:54 PM
To: İlker Aktuna (Koç.net)
Cc: Jan Janak; serusers(a)iptel.org
Subject: Re: [Serusers] problem with compiling the new CVS release
Hi Ilker,
try to add parameter exclude_modules="bdb" when running make.
Vaclav
On Mon, Apr 02, 2007 at 01:47:27PM +0300, ?lker Aktuna (Koç.net) wrote:
______________________________________________________________________
______________________________________________________________________
_ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor
olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde
kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya
hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji,
hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi
satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan
taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol
ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan
dogacak hicbir sorumlulugu kabul etmez.
This message is intended solely for the use of the individual or entity to whom it is
addressed , and may contain confidential information. If you are not the intended
recipient of this message or you receive this mail in error, you should refrain from
making any use of the contents and from opening any attachment. In that case, please
notify the sender immediately and return the message to the sender, then, delete and
destroy all copies. This e-mail message, can not be copied, published or sold for any
reason. This e-mail message has been swept by anti-virus systems for the presence of
computer viruses. In doing so, however, sender cannot warrant that virus or other forms
of data corruption may not be present and do not take any responsibility in any
occurrence.
______________________________________________________________________
______________________________________________________________________
_
Hi Michal and Jan,
I tried it with also "-D 20070328" parameter.
This time it does not compile:
make[1]: Entering directory `/root/yeni/sip_router/modules/bdb'
gcc -shared -Wl,-O2 -Wl,-E bdb_api.o bdb_base.o bdb.o bdb_rval.o bdb_sval.o bdb_uval.o
bdb_val.o -L/usr/local/lib -ldb-4.4 -o bdb.so
/usr/bin/ld: cannot find -ldb-4.4
collect2: ld returned 1 exit status
make[1]: *** [bdb.so] Error 1
make[1]: Leaving directory `/root/yeni/sip_router/modules/bdb'
make: *** [modules] Error 1
#
What now ?
Thanks,
ilker
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org
[mailto:serusers-bounces@lists.iptel.org] On Behalf Of ?lker Aktuna
(Koç.net)
Sent: Monday, April 02, 2007 1:11 PM
To: Jan Janak
Cc: serusers(a)iptel.org
Subject: RE: [Serusers] problem with compiling the new CVS release
Hi Jan,
This one compiles but does not have the "nat_flag" parameter in registrar
module.
Should I try with this :
"cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout -D 20070328
sip_router"
Thanks,
ilker
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org
[mailto:serusers-bounces@lists.iptel.org] On Behalf Of ?lker Aktuna
(Koç.net)
Sent: Monday, April 02, 2007 10:51 AM
To: Jan Janak
Cc: serusers(a)iptel.org
Subject: RE: [Serusers] problem with compiling the new CVS release
Thank you,
Trying right now...
-----Original Message-----
From: Jan Janak [mailto:jan@iptel.org]
Sent: Monday, April 02, 2007 10:08 AM
To: ?lker Aktuna (Koç.net)
Cc: Michal Matyska; serusers(a)iptel.org
Subject: Re: [Serusers] problem with compiling the new CVS release
Hello,
Get the code from the 2.0 branch:
cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout -r
rel_2_0_0 sip_router
Jan.
?lker Aktuna (Koç.net) wrote:
> Hi Michal,
>
> Thank you for your reply.
> I didn't understand what to do. Should I add the option to the command "cvs
-d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout sip_router" ?
> I gues not, because it does not accept that parameter.
>
> What should I do now ?
> Should I download a stable version ? Where can I find a stable version with presence
support ?
>
> In fact, I only need the new registrar module which includes "nat_flag"
parameter.
> But when I just add the new registrar module to my old sources, I can't compile
it.
>
> Thanks,
> ilker
>
>
> -----Original Message-----
> From: Michal Matyska [mailto:michal@iptel.org]
> Sent: Saturday, March 31, 2007 10:01 PM
> To: ?lker Aktuna (Koç.net)
> Cc: serusers(a)iptel.org
> Subject: Re: [Serusers] problem with compiling the new CVS release
>
> Hi,
>
> Sorry for the inconvinience... checkout the CVS code before the DB API started to
change (e.g. add -D 20070328 option to the cvs co command).
>
> Until all modules will be changed and using new API, it won't compile for a
while.
>
> Michal
>
> On Thu, 2007-03-29 at 11:48 +0200, Jan Janak wrote:
>
>
>> Folks,
>>
>> I have been working on a new database abstraction layer for SER
>> for a while and I'll start commiting it in CVS now. Please excuse
>> me if something is broken temporarily, this is a major improvement
>> that touches all modules that use the database. This change does
>> not affect Ottendorf, of course. The new DB layer will appear in
>> 2.1
>>
>> The main objectives for doing major changes in the DB API are:
>>
>> 1) Better support for databases that are not based on SQL, like
>> Berkeley db, LDAP, and fas in-memory databases.
>>
>> 2) The new code will no more store fetch all data from the database
>> in one step, it will be possible to get the data row by row (common
>> problem in usrloc)
>>
>> 3) Support for queries over multiple databases with various strategies
>> (i.e. usrloc database can be partitioned).
>>
>> 4) Support for database failover (i.e. if the primary database fails
>> that SER can start using another one, which can be even of different
>> type, i.e. mysql->postgres)
>>
>> I provide you with more details and documentation later once the
>> first version is in CVS.
>>
>> Jan.
>>
>>
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers