8 May
2017
8 May
'17
3:48 p.m.
You can load debugger module and enable cfgtrace, then the logs should
show what actions are executed from the kamailio.cfg -- check to be sure
it does the ones you expect to run there, maybe some conditions are
wrong, etc...
Cheers,
Daniel
On 05.05.17 16:56, Remsik,Robert wrote:
Fair enough. :) I wasn't sure what chunks of information would be
needed, or if the entire cfg is required. I'm pasting the sections
that I edited and that I think are relevent.
Thank you!
From the kamailio.cfg log:
# *** To run in debug mode:
# - define WITH_DEBUG
#!define WITH_DEBUG
### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG
debug=4
log_stderror=yes
#!else
debug=2
log_stderror=no
#!endif
memdbg=5
memlog=5
log_facility=LOG_LOCAL0
/* number of SIP routing processes */
children=8
/* add local domain aliases */
#alias="sip.mydomain.com"
/* uncomment and configure the following line if you want Kamailio to
* bind on a specific interface/port/proto (default bind on all
available) */
# listen=udp:10.0.0.10:5060
/* port to listen to (default 5060 for udp, tcp, scrtp, or 5061 for tls)*/
# port=5060
listen=129.82.13.26:5060
listen=129.82.13.26:5065
listen=129.82.13.26:5066
listen=129.82.13.26:5067
.:: Routing Infomration ::.
route[WITHINDLG] {
if (!has_totag()) return;
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
route(DLGURI);
if (is_method("BYE")) {
setflag(FLT_ACC); # do accounting ...
setflag(FLT_ACCFAILED); # ... even if the
transaction fails
} else if ( is_method("ACK") ) {
# ACK is forwarded statelessy
route(NATMANAGE);
} else if ( is_method("NOTIFY") ) {
# Add Record-Route for in-dialog NOTIFY as per
RFC 6665.
record_route();
# Copied code - maybe it'll work?
sl_send_reply("200", "OK");
rewritehost("otc.colostate.edu");
# t_relay("tcp:129.82.13.X:5066");
t_relay_to_tcp("129.82.13.X","5066");
exit;
}
route(RELAY);
exit;
}
... other stuff ...
}
Robert Remsik
ACNS
Desk Phone: 970 491 7120
Robert.Remsik(a)colostate.edu
------------------------------------------------------------------------
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of
Antony Stone <Antony.Stone(a)kamailio.open.source.it>
*Sent:* Friday, May 5, 2017 8:37:32 AM
*To:* Kamailio (SER) - Users Mailing List
*Subject:* Re: [SR-Users] How to debug Kamailio
On Friday 05 May 2017 at 15:34:39, Remsik,Robert wrote:
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - May 22-24 (USA) - www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
Hello!
I've got a base install of Kamailio and I'm trying to have it forward
packets generated by sipsak to a different proxy (a migration of an
existing ruleset by opensips). I can get the Kamailio process
started but
I can't figure out why Kamailio isn't
forwarding the packet and I
haven't
been able to get debugging working to determine
what's going on inside
Kamailio to fix it.
Can anyone please help me figure out how to debug this?
Only if you show us what you've tried so far.
For example, what changes have you made to the default configuration?
Antony.
--
<flopsie> yes, but this is #lbw, we don't do normal
Please reply to the
list;
please
*don't* CC me.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users