12 Apr
2005
12 Apr
'05
5:44 a.m.
Your attached ser.cfg does not use nathalper/rtpproxy.
Using the right rtpproxy config file could help:
http://www.onsip.org/modules/mydownloads/visit.php?cid=13&lid=19
Please note (as posted a couple of times already): That file has a small
error that is in the works to be fixed.
Between line 194 and 195, you need to insert: fix_nated_contact();
g-)
harry gaillac wrote:
Hello,
I read the howto frop onsip.org in order to set NAT
with rtpproxy.
I setup ser-0.9.0 rtpproxy from CVS it's ok .
192.168.0.0/24---FW+NAT---SER+rtpproxy------public
network
Here are my netfilter rules below :
My two Polycom ip 300 (alice & bob) are able to
register to ser but Subscribe/Notify via SIMPLE don't
work !?
When i try to call alice from bob or bob from alice
ser
reply 404 not found !!!!!!!
I wasted much time with ethereal to find the solution.
Thanks for help
Harry -:(
Chain INPUT (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
1273 885K ACCEPT all -- * *
0.0.0.0/0 0.0.0.0/0 state
RELATED,ESTABLISHED
7 429 ACCEPT all -- lo *
0.0.0.0/0 0.0.0.0/0 state NEW
70 4610 ACCEPT all -- eth0 *
192.168.0.0/24 0.0.0.0/0 state NEW
0 0 ACCEPT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 tcp dpt:80
state NEW
0 0 ACCEPT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 tcp dpt:443
state NEW
0 0 ACCEPT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 tcp dpt:21
state NEW
0 0 ACCEPT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 tcp dpt:2401
state NEW
0 0 ACCEPT udp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 udp dpt:53
state NEW
0 0 ACCEPT udp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 udp dpt:123
state NEW
0 0 ACCEPT icmp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 icmp type 0
code 0 state NEW
0 0 ACCEPT icmp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 icmp type 8
code 0 state NEW
0 0 ACCEPT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 tcp dpt:5060
state NEW
0 0 ACCEPT udp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 udp dpt:5060
state NEW
0 0 ACCEPT udp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 udp
dpts:35000:65000 state NEW
678 32876 REJECT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 reject-with
tcp-reset
26 1994 REJECT all -- ppp0 *
0.0.0.0/0 0.0.0.0/0 reject-with
icmp-net-prohibited
Chain FORWARD (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
0 0 ACCEPT all -- * *
0.0.0.0/0 0.0.0.0/0 state
RELATED,ESTABLISHED
0 0 ACCEPT all -- eth0 *
192.168.0.0/24 0.0.0.0/0 state NEW
0 0 ACCEPT all -- * eth0
192.168.0.0/24 0.0.0.0/0 state NEW
0 0 ACCEPT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 tcp dpt:80
state NEW
0 0 ACCEPT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 tcp dpt:80
state NEW
0 0 ACCEPT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 tcp dpt:443
state NEW
0 0 ACCEPT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 tcp dpt:443
state NEW
0 0 ACCEPT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 tcp dpt:21
state NEW
0 0 ACCEPT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 tcp dpt:21
state NEW
0 0 ACCEPT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 tcp dpt:2401
state NEW
0 0 ACCEPT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 tcp dpt:2401
state NEW
0 0 ACCEPT udp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 udp dpt:53
state NEW
0 0 ACCEPT udp -- * ppp0
0.0.0.0/0 0.0.0.0/0 udp dpt:53
state NEW
0 0 ACCEPT udp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 udp dpt:123
state NEW
0 0 ACCEPT udp -- * ppp0
0.0.0.0/0 0.0.0.0/0 udp dpt:123
state NEW
0 0 ACCEPT icmp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 icmp type 0
code 0 state NEW
0 0 ACCEPT icmp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 icmp type 8
code 0 state NEW
0 0 ACCEPT icmp -- * ppp0
0.0.0.0/0 0.0.0.0/0 icmp type 0
code 0 state NEW
0 0 ACCEPT icmp -- * ppp0
0.0.0.0/0 0.0.0.0/0 icmp type 8
code 0 state NEW
0 0 ACCEPT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 tcp dpt:5060
state NEW
0 0 ACCEPT udp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 udp dpt:5060
state NEW
0 0 ACCEPT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 tcp dpt:5060
state NEW
0 0 ACCEPT udp -- * ppp0
0.0.0.0/0 0.0.0.0/0 udp dpt:5060
state NEW
0 0 ACCEPT udp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 udp
dpts:35000:65000 state NEW
0 0 ACCEPT udp -- * ppp0
0.0.0.0/0 0.0.0.0/0 udp
dpts:35000:65000 state NEW
0 0 REJECT tcp -- ppp0 *
0.0.0.0/0 0.0.0.0/0 reject-with
tcp-reset
0 0 REJECT all -- ppp0 *
0.0.0.0/0 0.0.0.0/0 reject-with
icmp-net-prohibited
0 0 REJECT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 reject-with
tcp-reset
0 0 REJECT all -- * ppp0
0.0.0.0/0 0.0.0.0/0 reject-with
icmp-net-prohibited
Chain OUTPUT (policy DROP 1 packets, 164 bytes)
pkts bytes target prot opt in out source
destination
2072 424K ACCEPT all -- * *
0.0.0.0/0 0.0.0.0/0 state
RELATED,ESTABLISHED
7 429 ACCEPT all -- * lo
0.0.0.0/0 0.0.0.0/0 state NEW
32 2432 ACCEPT all -- * eth0
192.168.0.0/24 0.0.0.0/0 state NEW
47 2820 ACCEPT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 tcp dpt:80
state NEW
0 0 ACCEPT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 tcp dpt:443
state NEW
0 0 ACCEPT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 tcp dpt:21
state NEW
0 0 ACCEPT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 tcp dpt:2401
state NEW
80 5888 ACCEPT udp -- * ppp0
0.0.0.0/0 0.0.0.0/0 udp dpt:53
state NEW
0 0 ACCEPT udp -- * ppp0
0.0.0.0/0 0.0.0.0/0 udp dpt:123
state NEW
0 0 ACCEPT icmp -- * ppp0
0.0.0.0/0 0.0.0.0/0 icmp type 0
code 0 state NEW
0 0 ACCEPT icmp -- * ppp0
0.0.0.0/0 0.0.0.0/0 icmp type 8
code 0 state NEW
0 0 ACCEPT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 tcp dpt:5060
state NEW
0 0 ACCEPT udp -- * ppp0
0.0.0.0/0 0.0.0.0/0 udp dpt:5060
state NEW
0 0 ACCEPT udp -- * ppp0
0.0.0.0/0 0.0.0.0/0 udp
dpts:35000:65000 state NEW
0 0 REJECT tcp -- * ppp0
0.0.0.0/0 0.0.0.0/0 reject-with
tcp-reset
0 0 REJECT all -- * ppp0
0.0.0.0/0 0.0.0.0/0 reject-with
icmp-net-prohibited
__________________________________________________________________
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour
vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers