22 Aug
2007
22 Aug
'07
4:48 p.m.
Hi Martin,
In OpenSER 1.1, the lcr module would not work with oracle through
unixodbc when used in the non-caching mode. That was because the query
was using functions CHAR_LENGTH and RAND that are unknown to oracle.
In OpenSER 1.2 the lcr module is only working in caching mode. So there
should be no problem.
Probably what you need is .* or the appropriate regexp in the from_uri.
Check the lcr document for more info.
Best regards
George
-----Original Message-----
From: Martin.Gruber1(a)infineon.com
[mailto:Martin.Gruber1@infineon.com]
Sent: Wednesday, August 22, 2007 3:39 PM
To: Papadopoulos Georgios
Cc: users(a)openser.org
Subject: RE: OpenSER Oracle Connection
Hi Georgios,
I only want to ask you, if you also use the LCR-Tool.
With mysql it was running well, but now I have problems with
it. I do not know, if it is a problem of Unixodbc (I do not think so).
I use the following table structure:
Lcr:
PREFIX | FROM_URI | GRP_ID
|
PRIORITY |
--------------------------------------------------------------
----------
-------------------------------------------------------------
| | 1 |
1 |
Gw:
GW_NAME | GRP_ID | IP_ADDR | PORT |
URI_SCHEME | TRANSPORT | STRIP | PREFIX
--------------------------------------------------------------
----------
--------------------------------------------------------------
----------
--------------------------------------------------------------
----------
-------------
Gw 1 xxx.xx.xxx.xx
5060
Gw_grp:
GRP_ID GRP_NAME
----------
----------------------------------------------------------------
1 VIH
I always get the following error:
CALL: Call to international number
<sip:0004312345586@server.com> from <sip:1004@server.com>
0(23072) LCR: no gateways found m=INVITE
ruri=sip:0004312345586@server.com f=sip:1004@server.com
t=sip:0004312345586@server.com ip=xxx.xx.xxx.xxx
My openser.cfg looks like this:
if (uri=~"sip:0[0-9]+@.*")
{
#authorize if a call is going to PSTN
if(!proxy_authorize("", "subscriber"))
{
proxy_challenge("", "0");
return;
};
xlog("L_INFO", "CALL: Call to international number <$ru>
from <$fu>\n");
perl_exec("dialnr");
if(!load_gws())
{
sl_send_reply("500", "Internal server error, unable to
load phone gateways");
xlog("L_Info", "LCR: unable to load gateways\n");
exit;
}
if(!next_gw())
{
sl_send_reply("503", "Service not available, no
gateways found");
xlog("L_Info", "LCR: no gateways found m=$rm ruri=$ru
f=$fu t=$tu ip=$si id=$ci\n");
exit;
};
Can you help me?
Thanks and regards
Martin
Disclaimer
The information in this e-mail and any attachments is confidential. It is intended solely
for the attention and use of the named addressee(s). If you are not the intended
recipient, or person responsible for delivering this information to the intended
recipient, please notify the sender immediately. Unless you are the intended recipient or
his/her representative you are not authorized to, and must not, read, copy, distribute,
use or retain this message or any part of it. E-mail transmission cannot be guaranteed to
be secure or error-free as information could be intercepted, corrupted, lost, destroyed,
arrive late or incomplete, or contain viruses.