Re: [Users] enable NAT OPTION ping

Dear all, I want to force openser to ping all registered users with OPTIONS message, my configuration as follow, flag in location table is 512 for sip_nat_flag, and 513 for NAT. I can see the OPTIONS message send to the users and got replied for a few minutes, after that, it stop sending. Is there something I’ve done wrong? Thanks Ray modparam("registrar", "nat_flag", 6) modparam("registrar", "sip_natping_flag", 5) modparam("nathelper", "ping_nated_only", 0) modparam("nathelper", "natping_interval", 30) modparam("nathelper", "rtpproxy_sock", "/var/run/rtpproxy.sock") modparam("nathelper", "sipping_method", "OPTIONS") modparam("nathelper", "sipping_from", "sip:keepitopen@xxxxxx.net") if (nat_uac_test("31")) { if (method == "REGISTER" || !search("^Record-Route:")) { fix_nated_contact(); # Rewrite contact with source IP of signalling if (method=="REGISTER") { fix_nated_register(); } else if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via append_hf("P-hint: Proxied\r\n"); setflag(6); # Mark as NATed }; }; if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("", "subscriber")) { www_challenge("", "1"); exit(); }; Setflag(5); save("location"); return; }; alias_db_lookup("aliases"); if (lookup("location")) { append_hf("P-hint: usrloc applied\r\n"); route(1); return; }; }; ------------------------------------------------------------------------ _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users