28 Sep
2018
28 Sep
'18
2:54 p.m.
Hello,
Can you share your dmq config (modparams) and the output of dmq.list_nodes?
Cheers,
Charles
On Thu, 27 Sep 2018 at 12:51, Jan Hazenberg <jenus321(a)gmail.com> wrote:
In the output of "kamcmd dmq.list_nodes" i
see nodes twice. One with ip
address of the host and one with the hostname of the host.
Jan
On Thu, Sep 27, 2018 at 12:47 PM Jan Hazenberg <jenus321(a)gmail.com> wrote:
--
*Charles Chance*
Managing Director
t. 0330 120 1200 m. 07932 063 891
--
Sipcentric Ltd.
Company registered in England & Wales no.
7365592. Registered
office: Faraday Wharf, Innovation
Birmingham Campus, Holt Street, Birmingham Science Park, Birmingham B7 4BB.
Daniel,
It indeed sends duplicate DMQ messages, one to the ip of the other node
and one to the hostname of the other node.
Unknown request: KDMQ sip:dialog@sip04.voip.domain.acc:5060 |
(application/json)
Unknown request: KDMQ sip:dialog@10.10.10.12:5060 | (application/json)
Is there any way to disable this?
Thanks,
Jan
On Thu, Sep 27, 2018 at 11:50 AM Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
> Hello,
>
> the log message says that the dialog was already added to the timer. Do
> you see retransmissions of the DMQ requests on the network with
> ngrep/wireshark/...?
> Cheers,
> Daniel
>
> On 27.09.18 10:40, Jan Hazenberg wrote:
>
> Hello,
>
> I'm trying to replicate active dialogs using the DMQ module. I see the
> dialogs on the other nodes but it generates a error message in the logs on
> all the nodes:
>
> Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
> [dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg
> tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80
> Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
> [dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer
> 0x7efdca1beb98 [2643:3725]
>
> Even with the timeout_avp option disabled i still see the error
> messages. I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
>
> With debug enabled i see the correct data is replicated to the other
> nodes:
>
> dlg_dmq_replicate_action(): sending serialized data
>
{"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1":
>
"sip:sipuser@10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":"
> sip:+31101234567@10.10.10.10:5060"}
>
> "lifetime":7200 is in the serialized data, and when i check on the other
> node with "kamcmd dlg.list" i see that the lifetime data is not updated.
>
>
> Thanks,
>
> Jan
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
> Kamailio World Conference -- www.kamailioworld.com
> Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com
>
> _______________________________________________
Kamailio (SER) - Users Mailing
List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users