21 Nov
2003
21 Nov
'03
1:52 p.m.
I have don't have anything related to fwd.pulver.com in my phone or in
ser.cfg. I removed the settings completely.
below is my ser.cfg routing script
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("mydomain.com", "subscriber")) {
www_challenge("mydomain.com", "0");
break;
};
save("location");
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
----- Original Message -----
From: "Andrei Pelinescu-Onciul" <pelinescu-onciul(a)fokus.fraunhofer.de>
To: "Kannaiyan Natesan" <nkans(a)lycos.co.uk>
Cc: <serusers(a)lists.iptel.org>
Sent: Friday, November 21, 2003 6:08 PM
Subject: Re: [Serusers] Cache Problem ??
On Nov 21, 2003 at 16:38, Kannaiyan Natesan
<nkans(a)lycos.co.uk> wrote:
> I used a rule forwarding 14551(a)mydomain.com to 14551(a)fwd.pulver.com . It
was
> working very fine.
>
>
> When I removed that rule, if I dial 14551 it is still taking to the same
old
> URI although I removed that forwarding script in
the ser.cfg and I
restarted
ser.
What I expect is 404 Not found, when I dial 14451 when I remove that.
How can I remove the cache in ser?
There is no cache for config rules in ser. After a restart the new
config will be used.
Are you sure your phone is not sending the request directly to
fwd.pulver.com? Do you have an outbound proxy with ser address
configured?
Andrei