Hello,
I am not sure what do you mean with:
""" I have noticed that if Kamailio is IPv4-only and it "sees" IPv6-addresses(Contact, Via headers??) it will try to resolve the IPv6-address as a DNS name! """
If it just that on the specific deployment Kamailio has to bind on IPv4 and run as an IPv4 application, or actually you mean that Kamailio does not support IPv6?!?
For the later, Kamailio supports IPv6 for quite long time and should work fine on IPv6 only or mixed networks.
Cheers, Daniel
On Tue, Sep 17, 2019 at 3:22 AM Anthony Alba ascanio.alba7@gmail.com wrote:
Hi folks,
I'm wondering what you do to pass Apple app store tests (IPv6-only NAT64/DNS64 scenario) with the iOS app likely to put IPv6 addresses in the SDP, when Kamailio and your B2BUA(Asterisk, FreeSWITCH,...) are IPv4-only endpoints.
By "pass" I mean media flowing + SIP working - not sure the app store gatekeepers would actually test media, but it would be nice to have a robust solution.
Strictly speaking, this is not a Kamailio's problem but a media SDP/<your-rtp-proxy-of-choice> problem. But since everything is so closely intertwined I'm wondering where you choose to the location the "solution".
I have noticed that if Kamailio is IPv4-only and it "sees" IPv6-addresses(Contact, Via headers??) it will try to resolve the IPv6-address as a DNS name!
The Wikipedia article on NAT64 mentions 464XLAT(RFC 6877) and Port Control Protocol (RFC 7225), but those seem to be deep rabbit-holes...
Cheers Anthony Alba
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users