17 Nov
2005
17 Nov
'05
8:11 p.m.
Hi Lokesh,
see my inline comments.
regards,
bogdan
Lokesh Kumar wrote:
Hello Friends,
I installed openser, it is working fine. sipsak-0.9.0 is also working fine,
previously i was using 0.9.2 version of sipsak that is having problem.
Now I want to ask you 2 important things.
1>> Forget Asterisk for sometime, I am having a openser with one public IP
and one private IP, and I am having one voip gateway which is connected to
E1 PRI, and voip gateway is also having private IP. So, my question is can I
forward all the calls coming on public IP of openser to voip gateway via
private IP's of openser and voip gateway.After that voip gateway will
forward the call to E1 PRI.
SER Admin guide mentioned about how to gaurd your PSTN gateway with SER, but
the documentation is not suffciente there. So, can you please suggest in
this scenario, how do i can configure request routing in openser, like
pstn.cfg file.
this is a good practise - set your GW with private IP. Before relaying
the calls to the GW, you need to force as send interface the private one:
force_send_socket();
see http://www.openser.org/dokuwiki/doku.php?id=openser_core_cookbook
for inbound PSTN calls, be public IP will automatically forced by
usrloc. if usrloc is not involved, force the public interface.
2>> How do I have to register SIP phone on
openser. Where the sip phones are
behind the NAT, but NAT device supports STUN and UPnP. Do I need to setup
seperate STUN server or I can run this service on openser server.
you need to setup a STUN server, highly recommended on the same machine
with openser. See mystun from berlios.de .
Please help.
Regards
Lokesh
----- Original Message -----
From: <deepak.dhiman(a)uf4.net>
To: "Lokesh Kumar" <lokesh(a)interacesso.pt>
Sent: Tuesday, November 15, 2005 8:42 PM
Subject: Re: Need Help in configuring Asterisk with SER and PSTN gateway
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Hi Lokesh !
here i am writing my own experience baed views and facts: -
1) openser i certainly better than ser with better nat handling tricks, it
also has got TLS support first time ina sip server and certain other
enhanced feature are alo there, that can be find out on www.voip-info.org
2)sipsak is working fine on my pc and i really had no problem in
installing
it, i have installed vesion sipsak-0.9.0
3) i have not istalled any ser administrative program, so i can't tell you
which one is better.
4) in case of Radius server try with radius 0.9.0.
5) Finally, ser doesn't have any pstn support so you can't connect it to
the
pstn gateway,
you can forward all sip packets to asterisk server and it would forward it
to pstn gateway and i think that's is the possible solution of your
problem.
regards,
Deepak
Lokesh Kumar writes:
>Hello Deepak,
>
>Here are some of the questions which if you can respond then i will be
>
>
quite
>happy.
>
>1>> What is the difference between SER and openSER and which one is best
>
>
to
>adopt in terms of security and ease of use and
customization.
>2>> I am unable to install sipsak on SER, it gives me error, when i
>
>
execute
>make.
>3>> Which is the best web tool to manage SER, I tried SERweb and
>
>
SERadmin,
>but unfortunately unable to configure them
with SER
>4>> How do I have to setup a Voip trunk between asterisk and SER, where
>
>
SER
>forwards any requests from asterisk to PSTN
gateway.
>5>> How do I have to inter conect Radius with SER.
>
>I had searched everything on the internet but sufficiente documents are
>
>
not
>available.
>
>Looking for your reply
>Thanks a lot
>Lokesh
>
>
>----- Original Message -----
>From: <deepak.dhiman(a)uf4.net>
>To: "Lokesh Kumar" <lokesh(a)interacesso.pt>
>Sent: Monday, November 14, 2005 8:49 PM
>Subject: Re: Need Help in configuring Asterisk with SER and PSTN gateway
>
>
>
>
>>Hi Lokesh !
>>
>>I think u can easily configure it, let me know what have u tried so far
>>
>>
so
>>that i can tell u exactly where is the
problem..
>>
>>regard,
>>
>>Deepak
>>
>>Lokesh Kumar writes:
>>
>>
>>
>>>Hello,
>>>
>>>Deepak,
>>>
>>>I got your mail from the asterisk lists. I wanted to ask you about
>>>
>>>
how
>you had configured asterisk with SER. I am
facing lots of difficulties
>
>
with
>configuration of asterisk with SER. Can you
please guide me . I will be
>
>
very
thankfull
to you.
>>Regards
>>
>>
>>
>
>Software Engg. Trainee
>Trail Ridge Software India Pvt. Ltd.
>Noida
>
>
>
Software Engg. Trainee
Trail Ridge Software India Pvt. Ltd.
Noida