Hi Norm,
Thanks for reporting it. But i think like bogdan the vendor should check their SIP implementation =)
:tele
On Tue, 2007-10-09 at 07:57 -0400, Norman Brandinger wrote:
Tele:
I've run across similar problems with older sipura ata's and phones. It seemed the problem started when multiple phones were behind the same NAT and were using the same default port settings. Changing the port from say 5060/5061 to 5065/5066 for lines 1/2 of the second phone appeared to resolve this issue.
Regards, Norm
tele wrote:
Hi,
Thank you bogdan, i will contact the Vendor.
bye
:tele
On Tue, 2007-10-09 at 14:31 +0300, Bogdan-Andrei Iancu wrote:
Hi Tele,
0 value disable the retransmission detection (same cseq), so it is the opposite of what you are trying to do.
I think the fix should be in the device (as it breaks the RFC) and not in openser.
regards, bogdan
tele wrote:
Hi all,
I've a problem with a CPE/IAD that sometimes send a REGISTER with same Cseq in the location entry, OpenSER response is "400 Bad Request" with P-Registrar-Error: Invalid CSeq number. This causes the CPE/IAD to disable the voice port.
I want disable this kind of check, i've try to set the modparam("usrloc", "cseq_delay", 0) for disable retrasmission check but doesn't work
Any other idea to solve this? i've this problem with only this CPE.
Thanks!
:tele
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users