Re: [Users] Serial forking Help!!

I become crazy to realize a serial forking. I try to use load_contacts() and next_contscts(). This is my openser.cfg nd my location table: In teory when I call 309(a)192.168.9.98 the location with the q value equal to 0.80 it is the first but it is processed only the location 309(a)192.168.9.131. Help!!! # # $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify = 1 #tls_require_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/xlog.so" loadmodule "/usr/local/lib/openser/modules/lcr.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("registrar", "append_branches", 1) #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("usrloc","db_url","mysql://openser:heslo@127.0.0.1/openser") modparam("auth_db","db_url","mysql://openser:heslo@127.0.0.1/openser") modparam("lcr","db_url","mysql://openser:heslo@127.0.0.1/openser") modparam("avpops","avp_url","mysql://openser:heslo@127.0.0.1/openser") modparam("avpops","avp_table","usr_preferences") modparam("tm", "fr_timer", 8) modparam("tm", "fr_inv_timer", 10) modparam("tm", "wt_timer", 5) #modparam("avpops","avp_aliases","fwdbusy=i:665") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; if (method =="INVITE" && uri =~"^sip:0[0-9]*@*"){ log(1, "Check 1 Start PSTN Call\n"); rewritehostport("192.168.9.97:5061"); t_relay(); exit; } if (method == "CANCEL"){ t_relay(); } if (method =="BYE"){ t_relay(); } # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~&quot;(a)tls_domain1.net&quot;) { # t_relay_to_tls("IP_domain1","port_domain1"); # exit; #} else if(uri=~&quot;(a)tls_domain2.net&quot;) { # t_relay_to_tls("IP_domain2","port_domain2"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("create-net.it", "subscriber")) { www_challenge("create-net.it", "0"); exit; }; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; if(load_contacts()){ xlog("L_ERR","LOAD CONTACTS!\n"); } xlog("L_ERR","CONTACT <$ru> !\n"); t_on_failure("1"); t_relay(); #route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } failure_route[1] { if (next_contacts()) { xlog("L_ERR","NEXT CONTACT <$ru> !\n"); append_branch(); t_relay(); } else { xlog("L_ERR","ERROR!\n"); } } This is my location table ============================================================ username | domain | contact | q 400 | | sip:400@192.168.9.193 | 1.00 308 | | sip:308@192.168.9.181:5060 | 1.00 309 | | sip:309@192.168.9.131;transport=udp | 1.00 309 | | sip:400@192.168.9.97 | 0.80