12 Nov
2003
12 Nov
'03
11:41 a.m.
Yes,
and in addition to that there are some escape commands which say:
Replace this tag with the outgoing IP address.
Jan.
On 12-11 17:35, Nils Ohlmeier wrote:
Hi Harry,
no there is no documentation available. You have to read the source code to
understand the details.
Generally SER pushes details of an incoming request through the FIFO if
requested by the config script. An application reads from that FIFO and
passes a reply back through FIFO again.
May the source be with you :-)
Nils
On Wednesday 12 November 2003 17:28, Harry Behrens wrote:
Hi Klaus,
is there any documenation - save of course the source - with regards to
this inter-FIFO communication protocol/mechanism?
All I´ve understood so far is, that it seems one pushes SIP/SDP "messages"
into the FIFO (s.th. like a named pipe/UNIX socket?).
Also, I have seen scripts which seem to indicate that there is something
like "application escapes", where SER functionality can be addressed via
s.th like /^:name_of_function/)
Can anybody point to some technical spec/description of this mechanism and
how to configure/script it?
Thanx,
Harry
Dr. Harry Behrens
Projektleitung BIB3R
DAI Labor - Technische Universität Berlin
Sekretariat GOR 1-1, Franklinstrasse 28/29, 10587 Berlin
Fon: +49 30 314 23383
Fax: +49 30 314 21799
Email: harry.behrens(a)dai-labor.de
http://www.dai-labor.de
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers -----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:darilion@ict.tuwien.ac.at]
Gesendet: Mittwoch, 12. November 2003 16:13
An: sesha(a)iic.com; serusers(a)lists.iptel.org
Betreff: RE: [Serusers] Voicemail
Have you installed sems? Have you started sems?
(http://developer.berlios.de/projects/sems)
This is the voicemail programm for ser. You have to install
it on the same machine where ser is running and they will
communicate using a FIFO.
regards,
Klaus
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers -----Original Message-----
From: Sesha B [mailto:sesha@iic.com]
Sent: Wednesday, November 12, 2003 4:11 PM
To: Klaus Darilion; serusers(a)lists.iptel.org
Subject: RE: [Serusers] Voicemail
I'm getting this error from debugs:
500 couldn not contact announcement server.
Please let me know what it means? Is it possible to put the
voicemail on the
PBX? I have the voicemail configured for this number on the
PBX. Thank you.
-----Original Message-----
From: Klaus Darilion [mailto:darilion@ict.tuwien.ac.at]
Sent: Wednesday, November 12, 2003 9:42 AM
To: sesha(a)iic.com; serusers(a)lists.iptel.org
Subject: RE: [Serusers] Voicemail
Usually, if the phone (user) is registered, the call will
be forwarded
to the SIP phone instead of forwarding it to the
voicemail.
If a want
to redirect the call to the voicemail after
several seconds
(e.g. if no one
picks up the phone), you have to use the fr_inv_timer timer
and set up
script as shown in:
http://www.iptel.org/ser/doc/seruser/seruser.html#REPLYPROCESSING
regards,
Klaus
> -----Original Message-----
> From: Sesha B [mailto:sesha@iic.com]
> Sent: Wednesday, November 12, 2003 2:44 PM
> To: Jiri Kuthan; serusers(a)lists.iptel.org
> Subject: RE: [Serusers] Voicemail
>
>
> Hi,
>
> I'm trying to implement voicemail. When a call is made to a SIP
> phone, and if the SIP phone is ringing, the "ngrep port
5060" on the
> SER shows that it
> is connected. So, it is looking it as a successful connection
> and hence it
> is not going to the answering machine. Is there a roundabout
> solution for
> this? Please let me know. Thank you.
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers