15 Dec
2003
15 Dec
'03
12:20 p.m.
Hi again,
I have only UID0 and UID1 and GKorProxy and use Sip, nothing in
gateway. I'm not sure where to set my domain in ser. My hostname in
/etc/sysconfig/network is set to sip.coptalk.com. Should I change it just
to sip? I have several aliases I have placed trying to get things working
in ser.cfg,
alias="coptalk.com"
alias="sip"
alias="sip.coptalk.com
Besides that the only other place which has my domain in ser.cfg is the
if (uri==myself) {
if (method=="REGISTER") {
# digest authentication
log(1,"request for registration");
# if (!www_authorize("coptalk.com",
"subscriber")) {
# www_challenge("coptalk.com", "0");
# break;
# };
save("location");
break;
};
As you see I have commented out the www_authorize because if I don't Xten
lite cannot login. It and the ata just get the 401 unauthorized
error. Currently, I can dial out to a number, immediately the display on
the xten phone says error 404 user not found and just plays fast
busy. Then phone I was dialing out to, rings and if you pick it up there
is nothing there. I have to use the Xten for testing because with sip reg
on, the ata does not even get a dial tone. :p
I would like to think, with the call actually being passed to my gateway
and a return SIP/2.0 200 OK..Via: SIP/2.0/UDP, I must be getting close...
Thanks again for all your help,
Rick
At 12:45 PM 12/15/2003 +0100, Jesus Rodriguez wrote:
On Fri, 12 Dec 2003, Rick Gocher wrote:
Hello,
Saludos
JesusR.
-------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------
I'm not sure how to change the way the ata
sends it credentials. I have my
name Rick listed for the UID:0 and UID:1 and the password for that user. I
filled in the gateway as both an IP and FQDN with neither changing the
actual problem. I tried placing @coptalk.com and @sip.coptalk.com behind
my UID: i.e. Rick(a)sip.coptalk.com but then the ngrep reports Unauthorized.
etc. sip:Rick@sip.coptalk.com@sip.coptalk.com.... If I can't change the
ata perhaps I can change the way ser challenges?
With Cisco ATA you don't need the gateway field. You have to fill:
UID0
PWD0
GkOrProxy
UseSIP
(and others, but these are required).
For example, you have:
UID0 = Rick
PWD0 = password
GkOrProxy = sip.coptalk.com
UseSIP = 1
Then, in SER you have to set you domain as sip.coptalk.com and NOT
coptalk.com. You MUST use the same domain in SER and ATA. If you set GkOrPRoxy
in ATA as coptalk.com then SER must challenge coptalk.com.
Regards.
At 12:42 AM 12/12/2003 +0100, Jesus Rodriguez
wrote:
>On Thu, 11 Dec 2003, Rick Gocher wrote:
>
>Hello,
>
> > Just me, still trying to get authentication working... I have found by
> > placing a high debug value and starting ser I received some errors
I
never
> > saw before as I had no ata box plugged
in during the startup. I'm
not sure
> > if this points to why I can't
authenticate. When the output says
there is
> > no routing headers, is that the fault
of my ATA?
>
>I think was Jan who gave you the answer. SER is trying to challenge with
>domain sip.coptalk.com but you are sending credentials as coptalk.com
>
>
>
>
>
> > Dec 11 16:07:19 sip ser: 8(4583) SIP Request:
> > Dec 11 16:07:19 sip ser: 8(4583) method: <REGISTER>
> > Dec 11 16:07:19 sip ser: 8(4583) uri: <sip:sip.coptalk.com>
> > Dec 11 16:07:19 sip ser: 8(4583) version: <SIP/2.0>
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=1
> > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=5
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: Via found, flags=1
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: this is the first via
> > Dec 11 16:07:19 sip ser: 8(4583) After parse_msg...
> > Dec 11 16:07:19 sip ser: 8(4583) preparing to run routing scripts...
> > Dec 11 16:07:19 sip ser: 8(4583) entering main route 8(4583) DEBUG :
> > is_maxfwd_present: searching for max_forwards header
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=128
> > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=8
> > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: get_hdr_field: <To> [27];
> > uri=[sip:Rick@sip.coptalk.com]
> > Dec 11 16:07:19 sip ser:
> > Dec 11 16:07:19 sip ser: ]
> > Dec 11 16:07:19 sip ser: 8(4583) get_hdr_field: cseq <CSeq>: <7>
> <REGISTER>
> > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: get_hdr_body :
content_length=0
> > Dec 11 16:07:19 sip ser: 8(4583) found
end of header
> > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: is_maxfwd_present:
max_forwards
> > header not found!
> > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: add_param: tag=1804086518
> > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=29
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=256
> > Dec 11 16:07:19 sip ser: 8(4583) find_first_route(): No Route headers
> found
> > Dec 11 16:07:19 sip ser: 8(4583) loose_route(): There is no Route HF
> > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if
host==us:
16==9
> > && [sip.coptalk.com] ==
[127.0.0.1]
> > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if port 5060
> > matches port 5060
> > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if
host==us:
16==13
> > && [sip.coptalk.com] ==
[64.189.165.205]
> > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if port 5060
> > matches port 5060
> > Dec 11 16:07:19 sip ser: 8(4583) request for registration 8(4583)
> > check_nonce(): comparing [3fd907c2aa2d6c72cd666f9109e45155055b2d36] and
> > [3fd907c23a57f75133a55828041f2c9ee7b081c2]
> > Dec 11 16:07:19 sip ser: 8(4583) pre_auth(): Invalid nonce value
received,
> > very suspicious !
> > Dec 11 16:07:19 sip ser:
> > Dec 11 16:07:19 sip ser: '
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=-1
> > Dec 11 16:07:19 sip ser: 8(4583) check_via_address(64.189.165.206,
> > 64.189.165.206, 0)
> > Dec 11 16:07:19 sip ser: 8(4583) receive_msg: cleaning up
> > Dec 11 16:07:19 sip ser: 6(4581) SIP Request:
> > Dec 11 16:07:19 sip ser: 6(4581) method: <REGISTER>
> > Dec 11 16:07:19 sip ser: 6(4581) uri: <sip:sip.coptalk.com>
> > Dec 11 16:07:19 sip ser: 6(4581) version: <SIP/2.0>
> > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=1
> > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=5
> > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: Via found, flags=1
> > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: this is the first via
> > Dec 11 16:07:19 sip ser: 6(4581) After parse_msg...
> > Dec 11 16:07:19 sip ser: 6(4581) preparing to run routing scripts...
> > Dec 11 16:07:19 sip ser: 6(4581) entering main route 6(4581) DEBUG :
> > is_maxfwd_present: searching for max_forwards header
> > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=128
> > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=8
> > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: get_hdr_field: <To> [27];
> > uri=[sip:Rick@sip.coptalk.com]
> > Dec 11 16:07:19 sip ser:
> > Dec 11 16:07:19 sip ser: ]
> > Dec 11 16:07:19 sip ser: 6(4581) get_hdr_field: cseq <CSeq>: <8>
> <REGISTER>
> > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: get_hdr_body :
content_length=0
> > Dec 11 16:07:19 sip ser: 6(4581) found
end of header
> > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: is_maxfwd_present:
max_forwards
> > header not found!
> > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: add_param: tag=1804086518
> > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=29
> > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=256
> > Dec 11 16:07:19 sip ser: 6(4581) find_first_route(): No Route headers
> found
> > Dec 11 16:07:19 sip ser: 6(4581) loose_route(): There is no Route HF
> > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if
host==us:
16==9
> > && [sip.coptalk.com] ==
[127.0.0.1]
> > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if port 5060
> > matches port 5060
> > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if
host==us:
16==13
&& [sip.coptalk.com] == [64.189.165.205]
Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if port 5060
matches port 5060
Dec 11 16:07:20 sip ser: 6(4581) request for registration 6(4581)
check_nonce(): comparing [3fd907e3929aea9bad25fbd47b3ea062d9215574] and
[3fd907e3929aea9bad25fbd47b3ea062d9215574]
Dec 11 16:07:20 sip ser: 6(4581) get_ha1(): no result for user
'Rick(a)coptalk.com'
Dec 11 16:07:20 sip ser:
Dec 11 16:07:20 sip ser: '
Dec 11 16:07:20 sip ser: 6(4581) parse_headers: flags=-1
Dec 11 16:07:20 sip ser: 6(4581) check_via_address(64.189.165.206,
64.189.165.206, 0)
Dec 11 16:07:20 sip ser: 6(4581) receive_msg: cleaning up
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Saludos
JesusR.
-------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------