Thanks for the answer Sergiu, Ovidiu
I don't know your setup but I use kamailio as load balancer with FS nodes (instead of
kamailio's media proxy).
That is why I have FS node IP in the contact header of 200 OK message which go to MS teams
(it's outbound call from MS to kam).
Like we all know MS doesn't like IP address at all (in contact and record-route). Thus
I have to replace (at kamailio) FS node IP to fqdn of trunk I use with MS.
Also I had to comment record_route() for invites from MS.
You mentioned that I should not change contact header but... really MS ignore my 200 OK
for all other cases.
Also you mentioned that you have record route header in 200 OK, but again - MS do not
ignore 200 OK only in case I have only one record route header which was in initial INVITE
from MS.
You said it is working for you. Not sure why really. May be you use kamalio rtpproxy and
that is why have correct contact at once.
As for record route header - I have no ideas why MS doesn't ignore several record
route headter in 200 OK for your case.
With my changes i got ACK from MS. And also got voice call but obviously it is dopped in
~30 sec because kamialio do not know destination for ACK from MS (it has kamailio FQDN in
URI)
Normally with my setup, 200 OK keeps ip address of FS node and MS should send ACK to
kamilio IP but with FS IP address in URI. We all know that MS do not respect RFC and can
not do so. They just said in docs (we do not support sip proxy).
So... Now I should to think how re-direct such ACK to FS node. Should be possible to all
this begin to be more and more complicated.
Any advice are welcome!
________________________________
От: sr-users <sr-users-bounces(a)lists.kamailio.org> от имени Sergiu Pojoga
<pojogas(a)gmail.com>
Отправлено: 15 апреля 2020 г. 5:36
Кому: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Тема: Re: [SR-Users] kamailio integration with MS teams.
Also, you might want to check out this discussion from just a few days ago with a fellow
comrade about a similar MS Teams problem:
https://lists.kamailio.org/pipermail/sr-users/2020-April/108868.html
On Tue, Apr 14, 2020 at 4:23 PM Sergiu Pojoga
<pojogas@gmail.com<mailto:pojogas@gmail.com>> wrote:
Well... most likely you didn't fix it, at least not properly. There's no such
requirement to have a single RR in the 200 OK, especially only the one from the
sender's original invite.
By this logic, Kamailio can't insert it's own RR to keep itself in the call's
path. I can assure you that's not the case in reality.
On Tue, Apr 14, 2020 at 3:12 PM Nasida Yuriy
<nasida@live.ru<mailto:nasida@live.ru>> wrote:
Yes, sure, need to fix Record-Route. The question was how exactly :)
Well. I just fixed it by the way. 200 OK had to have only one record-route (which MS sent
in initial invite). Otherwise MS ignore it without any response.
________________________________
От: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
от имени Ovidiu Sas <osas@voipembedded.com<mailto:osas@voipembedded.com>>
Отправлено: 14 апреля 2020 г. 20:32
Кому: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Тема: Re: [SR-Users] kamailio integration with MS teams.
The instructions are pretty clear in the sense that you need to fix
the Record-Route header.
You don't need to touch the Contact header for in-dialog requests/replies.
Regards,
Ovidiu Sas
On Tue, Apr 14, 2020 at 12:19 PM Nasida Yuriy
<nasida@live.ru<mailto:nasida@live.ru>> wrote:
Hi guys,
Do you have some expirience with kamailio integration with MS teams ?
I follow the instructon from here
https://skalatan.de/en/blog/kamailio-sbc-teams
TLS part is configured correctly. I also got OPTIONS pings working between MS teams and
kamailio by following of this instruction. That is very good.
But... There is issues with outbound calls from MS teams to kamailo.
MS side send INVITE, kamailio responds with 180 and 200 OK, but looks like MS ignores us.
I know that I probably should use record_route_preset function here to modify Record-Route
headers to satisfy MS wishes.
But nothing helps. I also tried to modify contact header in 200 OK like it was done for
OPTIONS - no luck.
Anyone has a working example of kamailio files for MS team ?
Or at least sucessful pcap with them.
I can be wrong but looks like MS doesn't respect RFC at all.
Thanks.
Regards,
Team lead
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
VoIP Embedded, Inc.
http://www.voipembedded.com
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users