Re: [Serusers] Radius accounting

Hello. Thanks for your help. This is my ser.cfg. I set log_flag, log_level and radius_flag to 1, and I don't get anything

syslog. This is what you mean? Thanks again. Rosa. ------------------------ debug = 9 fork=no log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" modparam("usrloc", "db_mode", 2) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "radius_missed_flag", 2) modparam("acc", "radius_flag", 1) modparam("acc", "service_type", 15) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; setflag(1); if (!method=="REGISTER") record_route(); if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; if (uri==myself) { if (method=="REGISTER") { if (!radius_www_authorize("")) { www_challenge("", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { if (!t_relay()) { sl_reply_error(); }; } ------------------------ >From: Jan Janak <jan(a)iptel.org> >To: Rosa De Santis <rosadesantis(a)hotmail.com> >CC: serusers(a)lists.iptel.org >Subject: Re: [Serusers] Radius accounting >Date: Fri, 18 Nov 2005 21:16:22 +0100 > >Did you mark the transaction with correct flag ? Try to configure both >syslog and radius accounting with the same flag and see if you get any >accounting records in syslog. > > Jan. > >On 18-11-2005 20:04, Rosa De Santis wrote: >> Yes, I set the server IP in authserver and acctserver in the >> radiusclient.conf file in the radiusclient-ng folder. >> I also added the server and secret in the servers file in the same >folder. >> The strange thing is that i'm making authorization to the same Radius >> server, why accounting is not working? >> >> Thanks >> Rosa. >> >> >> >From: Jan Janak <jan(a)iptel.org> >> >To: Rosa De Santis <rosadesantis(a)hotmail.com> >> >CC: serusers(a)lists.iptel.org >> >Subject: Re: [Serusers] Radius accounting >> >Date: Fri, 18 Nov 2005 21:04:26 +0100 >> > >> >Did you configure the accounting server in the configuration file of >> >radiusclient-ng ? >> > >> >Do you have correct secret for the server ? >> > >> > Jan. >> > >> >On 18-11-2005 18:25, Rosa De Santis wrote: >> >> Hello all. >> >> >> >> Please, I am trying to make Radius authorization and accounting

>> >SER >> >> 0.9.3 and radiusclient-ng. I already set all the configuration as