RE: [Users] next_gw(): No ruri_user AVP

Hi bogdan, I put avp_print after next_gw , no avp output. 1(1334) load_gws(): DEBUG: Added gw_uri_avp <sip:@xxx.xxx.xxx.138:5060> 1(1334) load_gws(): DEBUG: Added gw_uri_avp <sip:@xxx.xxx.xxx.139:5060> 1(1334) does_uri_exit(): User in request uri does not exist 1(1334) is_user_in(): User is in group 'local' 1(1334) db_flags=3, flags=12 1(1334) DEBUG:avpops:load_avps: loaded avps = 1 1(1334) parse_headers: flags=ffffffffffffffff 1(1334) DEBUG:avpops:pushto_avps: 1 avps were processed 1(1334) next_gw(): No ruri_user AVP -----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Wednesday, February 15, 2006 4:39 AM To: Raymond Chen Cc: daniel(a)voice-system.ro; Users(a)openser.org Subject: Re: [Users] next_gw(): No ruri_user AVP Ray, the ruri_avp is added by next_gw after its usage from the REQUEST route. You may check this by placing an avp_print after you did next_gw() in request route (after calling route 3, for example). Check if there is any avp with ID 1402. regards, bogdan Raymond Chen wrote: main >route. But when it does in the failure_route the next_gw can't find the >ruri_user avp. > >Raymond > > > >Route { > > .......... > > Route(3); > > ........... > >} > >failure_route[1] { > > if (t_check_status("(480)|(408)")) { > if (avp_pushto("$ruri", "s:fwdnoanswer")) { > avp_delete("s:fwdnoanswer"); > route(3); > }; > }; > >} > >Route[3] { > > if (!load_gws()) { > sl_send_reply("500", "Server Internal Error - Cannot load >gateways"); > return; > }; > > ............... > > Route(5); > >} > >Route[5] { > > if (!next_gw()) { > rewriteuri("sip:userbusy@211.102.91.134:443"); > t_relay(); > return; > }; > > .............. > >} > > > >-----Original Message----- >From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >Sent: Wednesday, February 15, 2006 2:25 AM >To: Raymond Chen >Cc: daniel(a)voice-system.ro; Users(a)openser.org >Subject: Re: [Users] next_gw(): No ruri_user AVP > >Hi Ray, > >do you call load_gws() from failure route? if so, not that this is not >supported. >For LCR to work properly, you need to call load_gws() and next_gw() from >the request route and later next_gw() from failure routes. > >regards, >bogdan > >Raymond Chen wrote: > > > > > >>Hi Bogdan, >> >>Here is the debug >> >>1(2584) load_gws(): DEBUG: Added gw_uri_avp <sip:@xxx.xxx.xxx.138:5060> >>1(2584) load_gws(): DEBUG: Added gw_uri_avp <sip:@xxx.xxx.xxx.139:5060> >>1(2584) DEBUG:avpops:print_avp: p=0xf4f167c8, flags=2 >>1(2584) DEBUG: id=<1400> >>1(2584) DEBUG: val_str=<sip:@xxx.xxx.xxx.139:5060> >>1(2584) DEBUG:avpops:print_avp: p=0xf4f16790, flags=2 >>1(2584) DEBUG: id=<1400> >>1(2584) DEBUG: val_str=<sip:@xxx.xxx.xxx.138:5060> >>1(2584) does_uri_exit(): User in request uri does not exist >>1(2584) is_user_in(): User is in group 'local' >>1(2584) db_flags=3, flags=12 >>1(2584) DEBUG:avpops:print_avp: p=0xf4f167f8, flags=B >>1(2584) DEBUG: id=<1400> >>1(2584) DEBUG: val_str=<sip:@xxx.xxx.xxx.139:5060> >>1(2584) DEBUG:avpops:print_avp: p=0xf4f16790, flags=2 >>1(2584) DEBUG: id=<1400> >>1(2584) DEBUG: val_str=<sip:@xxx.xxx.xxx.xxx:5060> >>1(2584) next_gw(): No ruri_user AVP >> >> >> >>Raymond >> >> >>-----Original Message----- >>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >>Sent: Tuesday, February 14, 2006 10:55 AM >>To: Raymond Chen >>Cc: daniel(a)voice-system.ro; Users(a)openser.org >>Subject: Re: [Users] next_gw(): No ruri_user AVP >> >>Hi Ray, >> >>use avp_print() after the load_gw() to see what avps were loaded and >>again just before next_gw() to see the available avp. >>this will help to see if it's a problem at the load or search part. >> >>regards, >>bogdan >> >>