14 Feb
2014
14 Feb
'14
10:21 a.m.
On Thu, Feb 13, 2014 at 4:35 PM, <info(a)vintageelectronics.ca> wrote:
Corey:
listen=tls:127.0.0.1:5066
Make sure in your config that 127.0.0.1 is replaced by your real IP address,
or 0.0.0.0, otherwise it will only listen on the local host and won't be
open over the network.
port=5066
This is unnecessary.
tls.cfg is the same as installed from rpm. I did not
change anything in
it. Only defined WITH_TLS.
Make sure you have a valid key and certificate file.
Have you tried starting up with debug=4? The debug messages are usually
pretty good at pointing toward the problem.
Corey