Hi all! I have installed openser through CVS from the following link http://openser.org/dokuwiki/doku.php?id=install_and_maintain_openser_from_cv...
till the 8 th step in the link everything went well fine. in the 9 th step, there is a link to make oepnser.init script work and i did all the steps as described. I downloaded and installed the monit daemon to start openser thru it. however, now if i type /etc/init.d/openser start, it says command monit to start openser and then the command prompt appears back. i dont see the tcp and udp ports (5060 ) and other information etc when the openser is started.....and i cant figure out if it is running at all.....if i issue ps command, i dont see any pid for openser.....if i open the web interface of the monit daemon, i see that it is trying to start the openser but after some time it shows failed to start......
please let me know what to do asap..... Thanks
----- Original Message ----- From: users-request@openser.org To: users@openser.org Sent: Friday, May 26, 2006 3:30 PM Subject: Users Digest, Vol 12, Issue 71
Send Users mailing list submissions to users@openser.org
To subscribe or unsubscribe via the World Wide Web, visit http://openser.org/cgi-bin/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request@openser.org
You can reach the person managing the list at users-owner@openser.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..."
Today's Topics:
- Re: How to extract sip-id when using alias-id? (Bogdan-Andrei Iancu)
- Route Algorithm. (raviprakash sunkara)
- Re: Forward SUBSCRIBER (Bogdan-Andrei Iancu)
- RE: 2 Openser Instances (Sam Lee)
Message: 1 Date: Fri, 26 May 2006 12:35:21 +0300 From: Bogdan-Andrei Iancu bogdan@voice-system.ro Subject: Re: [Users] How to extract sip-id when using alias-id? To: Frogger froggerandbongo@yahoo.com Cc: users@openser.org Message-ID: 4476CBD9.80002@voice-system.ro Content-Type: text/plain; charset=us-ascii; format=flowed
Hi,
what you can do is to save into an AVP the alias before doing lookup(aliases). In failure route, before sending to voicemail, push the AVP into RURI to have the alias and not the sip id.
regards, bogdan
Frogger wrote:
Good point. I need to clarify...
The alias is working to route to the user however if the timer expires, the route fails or if there is a reject, the failure routes are applying their logic to the alias-id not the sip-id.
What I need to do is apply the failure route logic to the sip-id so we can send the attempt to voicemail.
Let say I have an alias of 1000@sip.com for sip-id 5551212@sip.com.
When 1000@sip.com is dialed by another user in the domain (I am using "use_domain") the call is properly routed to: 5551212@sip.com.
However, if 5551212@sip.com does not answer, timer expires, or a reject, then the failure logic is be applied to the alias.
Failure route says:
prefix("66"); append_branch(); append_urihf("CC-Diversion: ", "\r\n"); t_relay();
Result of the failure logic:
661000@sip.com
Needs to be:
665551212@sip.com
Thoughts?
F
--- Bogdan-Andrei Iancu bogdan@voice-system.ro wrote:
Hi,
not sure I understand - you dial an alias and via db_aliases you replace the alias with the sip-id. So you have the sip-id .. where is the problem?
regards, bogdan
Frogger wrote:
I am using alias_db to store alias's for users.
However when an alias is dialed I need to also be
able
to restore the alias owners original sip-id.
This is necessary to forward the call to voicemail using sip-id.
Any guidance on getting the sip-id out of the
alias_db
and replacing the alias-id prior to forwarding to vmail?
Thanks in advance!
F
Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam
protection around
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Message: 2 Date: Fri, 26 May 2006 05:38:23 -0400 From: "raviprakash sunkara" sunkara.raviprakash.feb14@gmail.com Subject: [Users] Route Algorithm. To: Users@openser.org, "Klaus Darilion" klaus.mailinglists@pernau.at, daniel@voice-system.ro, nickm@kryptontech.com Message-ID: f0f0f9340605260238l2e6ce419qd109b6f97e57c485@mail.gmail.com Content-Type: text/plain; charset="iso-8859-1"
Hi listers and Users.
Please help me in " how to make a call from one place to other place in route algorithm "
I got Call not approved ? what is this and also $04 and $08 messages as not found and request timeout........
It connect ( REgister) to server .
server respond as 1 st " 200 ok " and then " 408 request time out....
plesse help me
Bye..
Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com
<b>