Hello,
On 02/19/2009 05:34 PM, Asim Riaz wrote:
Hello, I am using LCR, for some reason load_gws() function is not finding the gateway in DB, it was working in the start then added some more routes and after that everything stopped working, I am not sure where to start troubleshooting, any idea ?
run kamailio with higher debug mode (e.g., debug=5) in configuration file.
You should get more debug messages in the syslog, that may give you some hints. look for lines containing 'lcr'.
Cheers, Daniel
kamctl lcr show
lcr routes +----+--------+----------+--------+----------+ | id | prefix | from_uri | grp_id | priority | +----+--------+----------+--------+----------+ | 9 | 0 | | 1 | 1 | +----+--------+----------+--------+----------+ lcr gateways +------------+---------------+------+------------+-----------+--------+-------+------+-------+ | gw_name | ip_addr | port | uri_scheme | transport | grp_id | strip | tag | flags | +------------+---------------+------+------------+-----------+--------+-------+------+-------+ | XXXX | XXXX | 5060 | 1 | 1 | 1 | 0 | | 0 | +------------+---------------+------+------------+-----------+--------+-------+------+-------+
my routing script
if(!load_gws()) { xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway "); sl_send_reply("503", "unable to find gateway"); exit; }Thanks in advance.
Asim
Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users