Hi,Felipe Martins
Can you tell me what's version of your MySQL server installation file, source or binary?
Thanks a lot!
======= 2005-04-01 20:29:54 您在来信中写道：=======
There is no problem on SER with MySQL, I have it running here with no problem, maybe the prob is your config file (ser.cfg). Have you tried to run SER with the default ser.cfg ?? It runs with no authentication. Have you set all the system variables for MySQL in your system ?
Take a closer look at the manuals
Best Regards.
On Fri, 1 Apr 2005 20:18:39 +0800 "ljzhang" xueyou38@163.com wrote:
Hi,
I configure SER with Mysql. After I start SER, it don't show "successful" word, and can't end. No UA can register to SER. I found when UA sends Register message, it can't receive any response. But I use serctl command to monitor SER, I can't find any error. After I restart Linux again, Linux'start process is blocked when it is starting ser. My Linux op can't be started. That's horrible.
Furthermore, After I configure SER with Mysql, I configure SER without Mysql again, SER also can't start nomally. The only way is to remove it and restall it.
Can you help me!! Thanks.
My ser.cfg is as following: # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
# Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests #if (!mf_process_maxfwd_header("10")) { # sl_send_reply("483","Too Many Hops"); # break; #}; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"127.0.0.1") {
if (method=="REGISTER") {# Uncomment this if you want to use digest authentication # if (!www_authorize("127.0.0.1", "subscriber")) { # www_challenge("127.0.0.1", "0"); # break; # };
save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; };}; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
}
________________jenny ________________xueyou38@163.com ____________________2005-04-01
-- Felipe Martins Mundivox Communications Tecnologia e Projetos fmartins@mundivox.com
Tel.: +55 +21 +3820 8839 Cel.: +55 +21 +9823 8602 Fax.: +55 +21 +3820 8844 www.mundivox.com
Serusers mailing list Serusers@iptel.org http://mail.iptel.org/mailman/listinfo/serusers
= = = = = = = = = = = = = = = = = = = =
致 礼！
ljzhang xueyou38@163.com 2005-04-04