13 Nov
2003
13 Nov
'03
5:36 p.m.
Hello,
the config file seems to be correct, the problem is either in the
configuration of radiusclient library or freeradius server.
Jan.
On 13-11 15:04, Madan wrote:
hi
this is my ser.cfg which i m trying to use with freeradius..but it is nt working,,i.e i
can not get my SIPUA registered to make a call ,and i m getting following log for ser
---ser log--
stateless - initializing
Maxfwd module- initializing
0(13376) mod_init(): Database connection opened successfuly
0(0) INFO: udp_init: SO_RCVBUF is initially 65535
0(0) INFO: udp_init: SO_RCVBUF is finally 262142
2(13378) INFO: fifo process starting: 13378
2(13378) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo...
0(13376) REGISTER: Authenticating user
0(13376) REGISTER: challenging user
0(13376) REGISTER: Authenticating user
0(13376) REGISTER: challenging user
0(13376) REGISTER: Authenticating user
0(13376) REGISTER: challenging user
0(13376) REGISTER: Authenticating user
0(13376) REGISTER: challenging user
0(13376) REGISTER: Authenticating user
0(13376) REGISTER: challenging user
0(13376) REGISTER: Authenticating user
0(13376) REGISTER: challenging user
---ser.cfg--
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes # (cmd line: -E)
listen=202.71.135.219
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
#loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
#loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 2)
modparam("auth_radius",
"radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
#modparam("uri_radius",
"radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
modparam("auth_radius", "service_type", 15)
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
#modparam("acc", "log_level", 1)
#modparam("acc", "radius_flag", 1)
# ------------------------- request routing logic -------------------
alias=sip.net4india.com
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (method=="REGISTER") {
log(1, "REGISTER: Authenticating user\n");
if (!radius_www_authorize("")) {
log(1, "REGISTER: challenging user\n");
www_challenge("", "0");
break;
};
save("location");
break;
};
if (method=="INVITE") {
log(1, "INVITE\n");
setflag(1); /* set for accounting (the same value as in
log_flag!) */
};
if (method=="MESSAGE") {
log(1, "MESSAGE\n");
setflag(1); /* set for accounting (the same value as in
log_flag!) */
};
if (method=="BYE" || method=="CANCEL") {
log (1, "BYE or CANCEL\n");
setflag(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
if (!t_relay()) {
sl_reply_error();
break;
};
}
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers