Oh, sorry, I've misunderstood your problem. What kind of device UA1 is? Can you please try the same with ATAs on both ends?
-Maxim
Ricardo Villa wrote:
Hi Maxim,
Sorry but I don't understand what you mean. Ser and RTP Proxy are on a machine with IP Address=192.168.1.111. The WAN interface of the NAT Router is 192.168.1.1. What exactly should I do?
UA1---SER(192.168.1.111)---(192.168.1.1)NAT(192.168.0.1)----ATA186(192.168.0 .15)
Thanks, Ricardo
----- Original Message ----- From: "Maxim Sobolev" sobomax@portaone.com To: "Ricardo Villa" ricvil@epm.net.co Cc: serusers@lists.iptel.org; serdev@lists.iptel.org Sent: Wednesday, July 09, 2003 7:18 PM Subject: Re: [Serusers] nathelper updated to support RTP proxy
Try to bind both ser and rtpproxy to the IP address of "WAN" interface - 192.168.0.1 and let me know if it helps or not.
-Maxim
Ricardo Villa wrote:
Hi Maxim,
I have tested on 0.8.12dev-t10 installed on RedHat 7.3.
The results are mixed. Only about 40% of the calls have audio even
though
the SDP is rewritten properly.
My test setup is like this:
UA1(192.168.1.10) -- SER(192.168.1.111)---(192.168.1.1)NAT(192.168.0.1)--ATA186(192.168.0.15)
I have included the "-f" output from the rtpproxy plus 4 ngrep files.
- success_from_internet.txt --> good call from UA1 to ATA186
- fail_from_internet.txt ---> no audio call from UA1 to ATA186
- success_from_nat.txt ----> good call from ATA186 to UA1
- fail_from_nat.txt ---> no audio call from ATA186 to UA1
Please let me know how else we can troubleshoot this.
Thanks, Ricardo
----- Original Message ----- From: "Maxim Sobolev" sobomax@portaone.com To: serusers@lists.iptel.org Cc: serdev@lists.iptel.org Sent: Sunday, July 06, 2003 12:16 PM Subject: [Serusers] nathelper updated to support RTP proxy
Folks,
Today I've updated nathelper module to support RTP proxy. It would be nice if somebody can test it on platforms other than FreeBSD, because I don't have an access to such boxes right now. The RTP proxy itself can be downloaded from:
https://demo.portaone.com/~sobomax/PortaSIP/rtpproxy/
Any feedback is greatly appreciated.
-Maxim P.S. I've committed it to the HEAD, those with 0.8.11 prerelease please apply the following patch:
https://demo.portaone.com/~sobomax/nathelper.diff
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers