you are right, thanks a lot!
-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Thursday, August 30, 2007 2:53 PM To: Papadopoulos Georgios Cc: users@openser.org Subject: Re: [OpenSER-Users] nat pinging question
maybe you are loading mediaproxy module too which also sends keep alives?
regards klaus
Papadopoulos Georgios schrieb:
Hello all,
In nathelper the documentation mentions two pinging types
(upd 4 byte
packets and stateless SIP request). Is there a way to
choose between
one or the other or are they both activated by default? I have configured nathelped to ping with OPTIONS every 15 seconds. modparam("nathelper", "natping_interval", 15) modparam("nathelper", "sipping_method", "OPTIONS") In addition to the OPTIONS
packets that
are sent every 15 seconds, there is a 4 byte packet that is
sent every
minute. Why does this happen and is there a way to turn it off?
This is what the ping packet sequence looks like: time ping 0 ---> 4 byte pkt 0 ---> OPTIONS 15 ---> OPTIONS 30 ---> OPTIONS 45 ---> OPTIONS 60 ---> 4 byte pkt 60 ---> OPTIONS
thank you
George
Disclaimer
The information in this e-mail and any attachments is
confidential. It
is intended solely for the attention and use of the named
addressee(s).
If you are not the intended recipient, or person responsible for delivering this information to the intended recipient,
please notify
the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must
not, read,
copy, distribute, use or retain this message or any part of
it. E-mail
transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost,
destroyed, arrive
late or incomplete, or contain viruses.
--
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users