Could you tell us what version of SER and SEMS are you using and from where did you get them (binary packages, tarballs, CVS) ?
Jan.
On 03-03 09:21, Welesley Sibelson Dias wrote:
I have one problem with voicemail , sems return vm_reply command not avaliable ? thks.
# # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
#/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes #*/
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/group.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0) modparam("tm", "fr_inv_timer", 90) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "kknd22") #modparam("auth","secret","teste23") modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius","service_type",15) #modparam("acc", "log_level", 1) #modparam("acc","log_flag",1) #modparam("acc","log_fmt","miocfs") modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag",2) modparam("group", "db_url", "sql://ser:heslo@localhost/ser") modparam("tm", "fr_inv_timer", 90)
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
if (method=="INVITE" || method=="BYE" || method=="CANCEL") { setflag(1); };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {# Uncomment this if you want to use digest authentication if (!radius_proxy_authorize("")) { proxy_challenge("", "1"); break; };
save("location"); break; }; # native SIP destinations are handled using our USRLOC DB #if (!lookup("location")) { # sl_send_reply("404", "Not Found"); # break; #};}; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP #if (!t_relay()) { # sl_reply_error(); #};
# does the user wish redirection on no availability? (i.e., is he # in the voicemail group?) -- determine it now and store it in # flag 4, before we rewrite the flag using UsrLoc if (is_user_in("Request-URI", "voicemail")) { setflag(4); };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # handle user which was not found route(4); break; };
# if user is on-line and is in voicemail group, enable redirection if (method == "INVITE" && isflagset(4)) { t_on_failure("1"); }; t_relay(); }
# ------------- handling of unavailable user ------------------ route[4] {
# non-Voip -- just send "off-line" if (!(method == "INVITE" || method == "ACK" || method == "CANCEL")) { sl_send_reply("404", "Not Found"); break; };
# not voicemail subscriber if (!isflagset(4)) { sl_send_reply("404", "Not Found and no voicemail turned on"); break; };
# forward to voicemail now rewritehostport("200.146.208.4:5090"); t_relay_to_udp("200.146.208.4", "5090"); }
# if forwarding downstream did not succeed, try voicemail running # at 200.146.208.4:5090
failure_route[1] { revert_uri(); rewritehostport("200.146.208.4:5090"); append_branch(); t_relay_to_udp("200.146.208.4", "5090"); }
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers