27 Sep
2015
27 Sep
'15
10:52 p.m.
The tmp variable is not intialized by default, so it can be anything
therefore the out of bounds value. It used only when printing some
errors, so it didn't get a proper value as no such error was printed for
you case.
The backtrace shows the process in in recvfrom(), so it waits for
traffic from network. That is the case when the processing of former sip
message was finished and now Kamailio waits to receive another one.
If you run centos, be sure you don't have limits in selinux rules -
better disable it completely and test again. Also, be sure you don't
have limits in the firewall, especially contrack module and sip firewall
modules in the kernel.
In kamailio.cfg, if you have pike module, be sure you don't drop good
packet with this module.
Cheers,
Daniel
On 25/09/15 19:53, José Seabra wrote:
Adding more information to my last email, when
kamailio starts
receiving calls, after more or less 40 seconds it stops processing
some sip messages.
I'm using the kamailio version 4.3.2
Best Regards
2015-09-25 18:34 GMT+01:00 José Seabra <joseseabra4(a)gmail.com
<mailto:joseseabra4@gmail.com>>:
I have one kamailio server listening in 2 network interfaces,
kamailio receives sip messages from interface A and then send it
to destine through interface B.
When we start kamailio service then run gdb for each kamailio
network interface process, execute the command "bt full" the
result is the following:
*tmp = 0x5f801b994c4715bd <Address 0x5f801b994c4715bd out of bounds>*
interface - A
bt full
#0 0x00007fb01bfa40c3 in recvfrom () from /lib64/libc.so.6
No symbol table info available.
#1 0x000000000047f2ba in udp_rcv_loop () at udp_server.c:421
len = 13
buf = '\000' <repeats 65535 times>
tmp = 0x5f801b994c4715bd <Address 0x5f801b994c4715bd out
of bounds>
from = 0x7faf9bf38bb8
fromlen = 16
ri = {src_ip = {af = 2309178400, len = 32765, u = {addrl =
{5458819, 4284160}, addr32 = {5458819, 0, 4284160, 0}, addr16 =
{19331, 83, 0, 0, 24320, 65, 0, 0},
addr =
"\203KS\000\000\000\000\000\000_A\000\000\000\000"}}, dst_ip = {af
= 2, len = 4, u = {addrl = {80026686, 0}, addr32 = {80026686, 0,
0, 0},
addr16 = {7230, 1221, 0, 0, 0, 0, 0, 0}, addr =
">\034\305\004", '\000' <repeats 11 times>}}, src_port =
55576,
dst_port = 5060, proto_reserved1 = 0,
proto_reserved2 = 0, src_su = {s = {sa_family = 32687,
sa_data = "\000\000\200D\243\211\375\177\000\000\213\337D"}, sin =
{sin_family = 32687, sin_port = 0,
sin_addr = {s_addr = 2309178496}, sin_zero =
"\375\177\000\000\213\337D"}, sin6 = {sin6_family = 32687,
sin6_port = 0, sin6_flowinfo = 2309178496,
sin6_addr = {__in6_u = {__u6_addr8 =
"\375\177\000\000\213\337D\000\000\000\000\000p", <incomplete
sequence \372\233>, __u6_addr16 = {32765, 0, 57227,
68, 0, 0, 21616, 39930}, __u6_addr32 = {32765,
4513675, 0, 2616874096}}}, sin6_scope_id = 32687}}, bind_address =
0x7faf9becd7d8, proto = 1 '\001'}
__FUNCTION__ = "udp_rcv_loop"
#2 0x0000000000525eae in main_loop () at main.c:1573
i = 0
pid = 0
si = 0x7faf9becd7d8
si_desc = "udp receiver child=0 sock=62.28.197.4:5060
<http://62.28.197.4:5060>\000\000\000\000\000\000\001\000\000\000\000\000\000\000\260\244r\023n\000\000\000\071\263q\000\000\000\000\000\020\243q\000\000\000\000\000\b\000\000\000\001\000\000\000\260\373\371\233\257\177\000\000\220E\243\211\375\177\000\000|\351O\000\000\000\000\000\000\266\253\023\257\177\000\000\260\244r\023\257\177\000"
---Type <return> to continue, or q <return> to quit---
nrprocs = 32
__FUNCTION__ = "main_loop"
#3 0x000000000052c395 in main (argc=11, argv=0x7ffd89a34848) at
main.c:2533
cfg_stream = 0x2296010
c = -1
r = 0
tmp = 0x7ffd89a35f61 ""
tmp_len = 0
port = 0
proto = 32688
options = 0x725010
":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:"
ret = -1
seed = 1641321572
rfd = 4
debug_save = 0
debug_flag = 0
dont_fork_cnt = 0
n_lst = 0x7ffd89a34710
p = 0x7fb01bf4c646 <intel_check_word+166>
"H\205\300t\025\017\266P\003\017\266\312D9\371\017\204",
<incomplete sequence \305>
__FUNCTION__ = "main"
interface B
bt full
#0 0x00007fb01bfa40c3 in recvfrom () from /lib64/libc.so.6
No symbol table info available.
#1 0x000000000047f2ba in udp_rcv_loop () at udp_server.c:421
len = 45
buf = '\000' <repeats 65535 times>
tmp = 0x13cb2f24296000e9 <Address 0x13cb2f24296000e9 out
of bounds>
from = 0x7faf9bf38bb8
fromlen = 16
ri = {src_ip = {af = 2309178400, len = 32765, u = {addrl =
{5458819, 4284160}, addr32 = {5458819, 0, 4284160, 0}, addr16 =
{19331, 83, 0, 0, 24320, 65, 0, 0}, addr =
"\203KS\000\000\000\000\000\000_A\000\000\000\000"}},
dst_ip = {af = 2, len = 4, u = {addrl = {2764381246, 0},
addr32 = {2764381246, 0, 0, 0}, addr16 = {7230, 42181, 0, 0, 0, 0,
0, 0}, addr = ">\034Ť", '\000' <repeats 11 times>}},
src_port =
56136, dst_port = 5060,
proto_reserved1 = 0, proto_reserved2 = 0, src_su = {s =
{sa_family = 32687, sa_data =
"\000\000\200D\243\211\375\177\000\000\213\337D"}, sin =
{sin_family = 32687, sin_port = 0, sin_addr = {s_addr = 2309178496},
sin_zero = "\375\177\000\000\213\337D"}, sin6 =
{sin6_family = 32687, sin6_port = 0, sin6_flowinfo = 2309178496,
sin6_addr = {__in6_u = {
__u6_addr8 =
"\375\177\000\000\213\337D\000\000\000\000\000p", <incomplete
sequence \372\233>, __u6_addr16 = {32765, 0, 57227, 68, 0, 0,
21616, 39930}, __u6_addr32 = {32765, 4513675, 0, 2616874096}}},
sin6_scope_id = 32687}}, bind_address =
0x7faf9becda08, proto = 1 '\001'}
__FUNCTION__ = "udp_rcv_loop"
#2 0x0000000000525eae in main_loop () at main.c:1573
---Type <return> to continue, or q <return> to quit---
i = 0
pid = 0
si = 0x7faf9becda08
si_desc = "udp receiver child=0 sock=62.28.197.164:5060
<http://62.28.197.164:5060>\000\000\000\000\001\000\000\000\000\000\000\000\260\244r\023n\000\000\000\071\263q\000\000\000\000\000\020\243q\000\000\000\000\000\b\000\000\000\001\000\000\000\260\373\371\233\257\177\000\000\220E\243\211\375\177\000\000|\351O\000\000\000\000\000\000\266\253\023\257\177\000\000\260\244r\023\257\177\000"
nrprocs = 32
__FUNCTION__ = "main_loop"
#3 0x000000000052c395 in main (argc=11, argv=0x7ffd89a34848) at
main.c:2533
cfg_stream = 0x2296010
c = -1
r = 0
tmp = 0x7ffd89a35f61 ""
tmp_len = 0
port = 0
proto = 32688
options = 0x725010
":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:"
---Type <return> to continue, or q <return> to quit---
ret = -1
seed = 1641321572
rfd = 4
debug_save = 0
debug_flag = 0
dont_fork_cnt = 0
n_lst = 0x7ffd89a34710
p = 0x7fb01bf4c646 <intel_check_word+166>
"H\205\300t\025\017\266P\003\017\266\312D9\371\017\204",
<incomplete sequence \305>
__FUNCTION__ = "main"
[root@c4-srv1 kamailio]# kamctl stats shmem
shmem:fragments = 2552
shmem:free_size = 2082764040
shmem:max_used_size = 66449600
shmem:real_used_size = 64719608
shmem:total_size = 2147483648
shmem:used_size = 54355992
Can anyone explain the meaning of
*tmp = 0x5f801b994c4715bd <Address 0x5f801b994c4715bd out of bounds>*
Best Regards
José Seabra
--
Cumprimentos
José Seabra
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com
Kamailio Advanced Training, Sep 28-30, 2015, in Berlin - http://asipto.com/u/kat