Re: [Serusers] Remote Party ID

In my opinion your problem cannot relate to redirect-number. Can you provide the "debug ccsip message", "debug ccsip events" and "debug isdn q931" of a test call that dont put the Remote-Party-ID into calling-number information ? thanks ----- Original Message ----- From: "Charles Galea" <charles.galea(a)maltacom.com> To: "Marcello Lupo" <lupo(a)itspecialist.it>it>; <serusers(a)lists.iptel.org> Sent: Wednesday, July 14, 2004 3:02 AM Subject: Re: [Serusers] Remote Party ID > Hi, > > I cannot understand why this redirecting number is related to my

> Actually my problem is that when SER forwards a call to the cisco 3620 > gateway, the gateway will not include the calling party number

Remote-Party-ID network > to user and not from user to network. > > > Any ideas? > > Thanks > > Charles > > > ----- Original Message ----- > From: "Marcello Lupo" <lupo(a)itspecialist.it> > To: <serusers(a)lists.iptel.org> > Sent: Tuesday, July 13, 2004 16:14 > Subject: Re: [Serusers] Remote Party ID > > > > Hi, > > we got the same problem on cisco 3725 and can confirm that is a

on (with gateway > and > > > this bug like to be a problem in redirect number. > > > I dont see that this bug is related to SIP rpid. > > > Also, the bug is reported in AS5300 platform > > > > > > ------ bug description ------- > > > Symptoms: Some Cisco ISDN switches do not support Redirecting Number > (RDN) > > > Information Element (IE) from user to network. > > > > > > Conditions: This symptom is observed on Cisco NTT, DMS100, and NET5 > > > switches. > > > ------ bug description ------- > > > > > > > > > > > > ----- Original Message ----- > > > From: "Steve Blair" <blairs(a)isc.upenn.edu> > > > To: "Charles Galea" <charles.galea(a)maltacom.com> > > > Cc: <serusers(a)lists.iptel.org> > > > Sent: Tuesday, July 13, 2004 9:30 AM > > > Subject: Re: [Serusers] Remote Party ID > > > > > > > There is a Cisco bug report that may also affect you. It is > > > > CSCeb20959, Some Cisco ISDN switches do not support > > > > Redirecting Number (RDN) Information Element (IE) from > > > > user to network. > > > > > > > > _Steve > > > > > > > > Charles Galea wrote: > > > > >Thanks a lot, > > > > > > > > > >i have included an authentication check before append_rpid_hf()

> now > > > > > > it > > > > > > > >is working fine. Now I am trying to figure out why my 3600

is > > > > > > still > > > > > > > >not sending the calling party field in the setup message. > > > > > > > > > >Regards, > > > > > > > > > >Charles > > > > > > > > > > > > > > >----- Original Message ----- > > > > >From: "Bogdan-Andrei IANCU" <iancu(a)fokus.fraunhofer.de> > > > > >To: "Charles Galea" <charles.galea(a)maltacom.com> > > > > >Cc: <serusers(a)lists.iptel.org>rg>; "'Andrew Caruana'" > > > > > > <andrew.caruana(a)maltacom.com> > > > > > > > >Sent: Monday, July 12, 2004 13:58 > > > > >Subject: Re: [Serusers] Remote Party ID > > > > > > > > > >>rpid is fetched from db during an authentication check. so, if

not > > > > >> have any > > > > > > > > > >rpid. > > > > > > > > > >>bogdan > > > > >> > > > > >>Charles Galea wrote: > > > > >>>We have downloaded the latest ser software from cvs in order to > > > > >>>support appending of remote party id while using mysql as the

> > > > >>>database. > > > > >>>After compiling and installing the ser software we included the > auth > > > > >>>and auth_db parameters and also the append_rpid_hf() function

> our > > > > >>>ser.cfg file as shown below. > > > > >>> > > > > >>>SER server starts and registration is successfull however when > > > > >>>forwarding to the pstn gateway, ser will not append the remote > party > > > > >>>id header, even if the rpid and uri columns in mysql database

are > > > > >>>also successfull however the gateway will not include the

> > > > >>>party number in the setup message because the rpid header is > missing. > > > > >>> > > > > >>> > > > > >>>Any ideas please? > > > > >>> > > > > >>>Thanks > > > > >>> > > > > >>>Charles and Andrew > > > > >>> > > > > >>> > > > > >>> > > > > >>># ----------- global configuration > parameters ------------------------ > > > > >>> > > > > >>>#debug=3 # debug level (cmd line: -dddddddddd) > > > > >>>#fork=yes > > > > >>>#log_stderror=no # (cmd line: -E) > > > > >>> > > > > >>>/* Uncomment these lines to enter debugging mode > > > > >>>debug=7 > > > > >>>fork=no > > > > >>>log_stderror=yes > > > > >>>*/ > > > > >>> > > > > >>>check_via=no # (cmd. line: -v) > > > > >>>dns=no # (cmd. line: -r) > > > > >>>rev_dns=no # (cmd. line: -R) > > > > >>>#port=5060 > > > > >>>#children=4 > > > > >>>fifo="/tmp/ser_fifo" > > > > >>> > > > > >>># ------------------ module > loading ---------------------------------- > > > > >>> > > > > >>>loadmodule "/our_downloads/sip_router/modules/mysql/mysql.so" > > > > >>>#loadmodule "//lib/ser/modules/mysql.so" > > > > >>> > > > > >>>loadmodule "//lib/ser/modules/sl.so" > > > > >>>loadmodule "//lib/ser/modules/tm.so" > > > > >>>loadmodule "//lib/ser/modules/rr.so" > > > > >>>loadmodule "//lib/ser/modules/maxfwd.so" > > > > >>>loadmodule "//lib/ser/modules/usrloc.so" > > > > >>>loadmodule "//lib/ser/modules/registrar.so" > > > > >>>loadmodule "//lib/ser/modules/textops.so" > > > > >>> > > > > >>># Uncomment this if you want digest authentication > > > > >>># mysql.so must be loaded ! > > > > >>>loadmodule "//lib/ser/modules/auth.so" > > > > >>>loadmodule "//lib/ser/modules/auth_db.so" > > > > >>> > > > > >>> > > > > >>>#loadmodule "//lib/ser/modules/acc.so" > > > > >>> > > > > >>># ----------------- setting module-specific > parameters --------------- > > > > >>> > > > > >>># -- usrloc params -- > > > > >>> > > > > >>>#modparam("usrloc", "db_mode", 0) > > > > >>> > > > > >>># Uncomment this if you want to use SQL database > > > > >>># for persistent storage and comment the previous line > > > > >>>modparam("usrloc", "db_mode", 1) > > > > >>> > > > > >>> > > > > >>> > > > > >>># -- auth params -- > > > > >>> > > > > >>> > > > > >>>modparam("auth_db", "use_rpid", 1) > > > > >>>modparam("auth_db", "rpid_column", "rpid") > > > > >>>modparam("auth", "rpid_prefix", "<sip:") > > > > >>>modparam("auth", "rpid_suffix", > > > > >>>"@testphone.com>:party=calling;screen=no;privacy=off") > > > > >>> > > > > >>> > > > > >>> > > > > >>> > > > > >>># Uncomment if you are using auth module > > > > >>># > > > > >>>modparam("auth_db", "calculate_ha1", yes) > > > > >>># > > > > >>># If you set "calculate_ha1" parameter to yes (which true in

> > > > >>>config), > > > > >>># uncomment also the following parameter) > > > > >>># > > > > >>>modparam("auth_db", "password_column", "password") > > > > >>> > > > > >>># -- rr params -- > > > > >>># add value to ;lr param to make some broken UAs happy > > > > >>>modparam("rr", "enable_full_lr", 1) > > > > >>> > > > > >>> > > > > >>> > > > > >>># ------------------------- request routing > logic ------------------- > > > > >>> > > > > >>># main routing logic > > > > >>> > > > > >>>route{ > > > > >>> > > > > >>> # initial sanity checks -- messages with > > > > >>> # max_forwards==0, or excessively long requests > > > > >>> if (!mf_process_maxfwd_header("10")) { > > > > >>> sl_send_reply("483","Too Many Hops"); > > > > >>> break; > > > > >>> }; > > > > >>> if ( msg:len > max_len ) { > > > > >>> sl_send_reply("513", "Message too big"); > > > > >>> break; > > > > >>> }; > > > > >>> > > > > >>> > > > > >>> > > > > >>> > > > > >>> # we record-route all messages -- to make sure that > > > > >>> # subsequent messages will go through our proxy; that's > > > > >>> # particularly good if upstream and downstream entities > > > > >>> # use different transport protocol > > > > >>> record_route(); > > > > >>> # loose-route processing > > > > >>> if (loose_route()) { > > > > >>> t_relay(); > > > > >>> break; > > > > >>> }; > > > > >>> > > > > >>> > > > > >>> # if the request is for other domain use UsrLoc > > > > >>> # (in case, it does not work, use the following command > > > > >>> # with proper names and addresses in it) > > > > >>> if (uri=~"testphone.com") { > > > > >>> lookup("aliases"); > > > > >>> if (method=="REGISTER") { > > > > >>> > > > > >>>#Uncomment this if you want to use digest authentication > > > > >>> if (!www_authorize("testphone.com", "subscriber")) { > > > > >>> www_challenge("testphone.com", "0"); > > > > >>> append_rpid_hf(); > > > > >>> break; > > > > >>> }; > > > > >>> > > > > >>> > > > > >>> > > > > >>> save("location"); > > > > >>> break; > > > > >>> }; > > > > >>> > > > > >>> > > > > >>> > > > > >>> if (uri=~"^sip:21") { > > > > >>> append_rpid_hf(); > > > > >>> forward(a valid ip address for the

> was > > > > >>>inserted here); > > > > >>> break; > > > > >>> } > > > > >>> > > > > >>> if (uri=~"^sip:123") { > > > > >>> forward(a valid ip address for the