18 Nov
2005
18 Nov
'05
1:27 a.m.
Hello Friends,
I installed openser, it is working fine. sipsak-0.9.0 is also working fine,
previously i was using 0.9.2 version of sipsak that is having problem.
Now I want to ask you 2 important things.
1>> Forget Asterisk for sometime, I am having a openser with one public IP
and one private IP, and I am having one voip gateway which is connected to
E1 PRI, and voip gateway is also having private IP. So, my question is can I
forward all the calls coming on public IP of openser to voip gateway via
private IP's of openser and voip gateway.After that voip gateway will
forward the call to E1 PRI.
SER Admin guide mentioned about how to gaurd your PSTN gateway with SER, but
the documentation is not suffciente there. So, can you please suggest in
this scenario, how do i can configure request routing in openser, like
pstn.cfg file.
2>> How do I have to register SIP phone on openser. Where the sip phones are
behind the NAT, but NAT device supports STUN and UPnP. Do I need to setup
seperate STUN server or I can run this service on openser server.
Please help.
Regards
Lokesh
----- Original Message -----
From: <deepak.dhiman(a)uf4.net>
To: "Lokesh Kumar" <lokesh(a)interacesso.pt>
Sent: Tuesday, November 15, 2005 8:42 PM
Subject: Re: Need Help in configuring Asterisk with SER and PSTN gateway
Hi Lokesh !
here i am writing my own experience baed views and facts: -
1) openser i certainly better than ser with better nat handling tricks, it
also has got TLS support first time ina sip server and certain other
enhanced feature are alo there, that can be find out on www.voip-info.org
2)sipsak is working fine on my pc and i really had no problem in
installing
it, i have installed vesion sipsak-0.9.0
3) i have not istalled any ser administrative program, so i can't tell you
which one is better.
4) in case of Radius server try with radius 0.9.0.
5) Finally, ser doesn't have any pstn support so you can't connect it to
the
pstn gateway,
you can forward all sip packets to asterisk server and it would forward it
to pstn gateway and i think that's is the possible solution of your
problem.
regards,
Deepak
Lokesh Kumar writes:
> Hello Deepak,
>
> Here are some of the questions which if you can respond then i will be
quite
> happy.
>
> 1>> What is the difference between SER and openSER and which one is best
to
> adopt in terms of security and ease of use and
customization.
> 2>> I am unable to install sipsak on SER, it gives me error, when i
execute
> make.
> 3>> Which is the best web tool to manage SER, I tried SERweb and
SERadmin,
> but unfortunately unable to configure them with
SER
> 4>> How do I have to setup a Voip trunk between asterisk and SER, where
SER
> forwards any requests from asterisk to PSTN
gateway.
> 5>> How do I have to inter conect Radius with SER.
>
> I had searched everything on the internet but sufficiente documents are
not
> available.
>
> Looking for your reply
> Thanks a lot
> Lokesh
>
>
> ----- Original Message -----
> From: <deepak.dhiman(a)uf4.net>
> To: "Lokesh Kumar" <lokesh(a)interacesso.pt>
> Sent: Monday, November 14, 2005 8:49 PM
> Subject: Re: Need Help in configuring Asterisk with SER and PSTN gateway
>
>
>> Hi Lokesh !
>>
>> I think u can easily configure it, let me know what have u tried so far
so
>> that i can tell u exactly where is the
problem..
>>
>> regard,
>>
>> Deepak
>>
>> Lokesh Kumar writes:
>>
>> > Hello,
>> >
>> > Deepak,
>> >
>> > I got your mail from the asterisk lists. I wanted to ask you about
how
> you had configured asterisk with SER. I am facing
lots of difficulties
with
> configuration of asterisk with SER. Can you
please guide me . I will be
very
thankfull to
you.
Software Engg. Trainee
Trail Ridge Software India Pvt. Ltd.
Noida
Regards
Software Engg. Trainee
Trail Ridge Software India Pvt. Ltd.
Noida