I guess you are using unstable development version. This version has
multi domain support on by default and not everything is finished yet.
As oposed to stable versions which work correctly.
Jan.
On 02-12 14:05, dhiraj.2.bhuyan(a)bt.com wrote:
Thanks for the tip.
Managed to fix it by adding a -
if( uri=~"sip:[.]*@132.146.196.91" ) {
rewritehost("eniac.alien.bt.co.uk");
};
at the very beginning. Don't know if this is a good thing to do. Surely SER should
have been able to see that 132.146.196.91 == eniac.alien.bt.co.uk? Or am I missing
something?
Regards
Dhiraj
-----Original Message-----
From: Kannaiyan Natesan [mailto:nkans@lycos.co.uk]
Sent: 02 December 2003 13:29
To: Bhuyan,D,Dhiraj,XVR3 R
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] SIP URL with IP Address Problem
You can try replacing the save("location") with the below lines,
if( method==REGISTER)
{
.........
// should be within the authorised condition ...
if( uri=~"sip:[.]*@eniac.alien.bt.co.uk" )
{
save("location");
rewritehost("132.146.196.91");
save("location");
}
else
save("location");
break;
};
You may also need a line diversion of call, ( Not sure, but you can check
without the following )
if( uri=~"sip:[.]*@132.146.196.91" )
{
rewritehost("eniac.alien.bt.co.uk");
forward(uri:host,uri:post);
}
----- Original Message -----
From: <dhiraj.2.bhuyan(a)bt.com>
To: <serusers(a)lists.iptel.org>
Sent: Tuesday, December 02, 2003 10:50 AM
Subject: RE: [Serusers] SIP URL with IP Address Problem
Sorry I attached the wrong config file in my previous email. Correct one
attached -
Regards,
Dhiraj
-----Original Message-----
From: dhiraj.2.bhuyan(a)bt.com [mailto:dhiraj.2.bhuyan@bt.com]
Sent: 02 December 2003 10:48
To: serusers(a)lists.iptel.org
Subject: [Serusers] SIP URL with IP Address Problem
Hello everyone,
I am facing the following problem -
eniac.alien.bt.co.uk = 132.146.196.91
A Grandstream BudgeTone 100 phone is registered to the SER registrar and
proxy running on eniac.alien.bt.co.uk as dhiraj(a)eniac.alien.bt.co.uk
When I try
serctl ping sip:dhiraj@eniac.alien.bt.co.uk
I get back a "200 OK"
But when I do
serctl ping sip:dhiraj@132.146.196.91
I get back a "404".
How to overcome this? I am using SER from the CVS. My ser.cfg is attached.
Thanks,
Dhiraj Bhuyan
Network Security Specialist,
BT Exact
Tel: +44 1473 643932
Mob: +44 7962 012145
Email: dhiraj.2.bhuyan(a)bt.com
----------------------------------------------------------------------------
----
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers