[Serusers] problem with radius autentifacation

Dear Users i have Fedora Core 1 intalled with a SER 8.0.14 working fine with accounting and autentification with MySql, but i 've been tried to configure with FreeRadius and RadiusClient 4.3 and the next Error appears When i configure all like Ser_Radius like this /etc/raddb Dir ****************** file dictioary************************************************************ $INCLUDE /usr/share/freeradius/dictionary $INCLUDE /usr/local/etc/radiusclient/dictionary.ser ### the dictionary thet cames with the source in ser_8.0.14 ****************** File users************************************************ test Auth-Type := Digest, User-Password == "test" Reply-Message = "Hello, test with digest" ******************* File Clients.conf****************************** client 127.0.0.1 { # # The shared secret use to "encrypt" and "sign" packets between # the NAS and FreeRADIUS. You MUST change this secret from the # default, otherwise it's not a secret any more! # # The secret can be any string, up to 32 characters in length. # secret = xxxx # # The short name is used as an alias for the fully qualified # domain name, or the IP address. # shortname = localhost # # the following three fields are optional, but may be used by # checkrad.pl for simultaneous use checks # # # The nastype tells 'checkrad.pl' which NAS-specific method to # use to query the NAS for simultaneous use. # # Permitted NAS types are: # # cisco # computone # livingston # max40xx # multitech # netserver # pathras # patton # portslave # tc # usrhiper # other # for all other types # nastype = other # localhost isn't usually a NAS... # # The following two configurations are for future use. # The 'naspasswd' file is currently used to store the NAS # login name and password, which is used by checkrad.pl # when querying the NAS for simultaneous use. # # login = !root # password = someadminpas } ***********************File Radiusd.conf*********************************** i've been uncoment the line with diget in "Autentication" and "Authorize" **************************************************************************** **** And i've been included the dictionary.ser in /usr/local/etc/radiusclient/dictionary so when i make a test like the ser_radius.txt radclient -f digest localhost auth xxxxx in the radius log apears : rad_recv: Access-Request packet from host 127.0.0.1:32769, id=138, length=140 User-Name = "test" Digest-Response = "631d6d73147add2f9e437f59bbc3aeb7" Digest-Attributes = "\001\013testrealm" Digest-Attributes = "\002\n1234abcd" Digest-Attributes = "\003\010INVITE" Digest-Attributes = "\004\034sip:5555551212@example.com" Digest-Attributes = "\006\005MD5" Digest-Attributes = "\n\006test" modcall: entering group authorize modcall[authorize]: module "preprocess" returns ok modcall[authorize]: module "chap" returns noop rlm_eap: EAP-Message not found modcall[authorize]: module "eap" returns noop rlm_digest: Converting Digest-Attributes to something sane... Digest-Realm = "testrealm" Digest-Nonce = "1234abcd" Digest-Method = "INVITE" Digest-URI = "sip:5555551212@example.com" Digest-Algorithm = "MD5" Digest-User-Name = "test" rlm_digest: Adding Auth-Type = DIGEST modcall[authorize]: module "digest" returns ok rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop users: Matched DEFAULT at 152 modcall[authorize]: module "files" returns ok modcall[authorize]: module "mschap" returns noop modcall: group authorize returns ok rad_check_password: Found Auth-Type DIGEST auth: type "digest" modcall: entering group authenticate rlm_digest: Configuration item "User-Password" is required for authentication. ##############this is my problem.................. modcall[authenticate]: module "digest" returns invalid modcall: group authenticate returns invalid auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 138 to 127.0.0.1:32769 Waking up in 4 seconds... **************************************************************************** ****************** then if i change the dictionary.ser for dictionary.sip that comes with the source in radiusClient4.3.................the test works well....... but if i try to autenticate an UA like a ATA-186, the same message appears rlm_digest: Configuration item "User-Password" is required for authentication. ##############this is my problem.................. Best Regards Gustaf