4 Nov
2020
4 Nov
'20
4 p.m.
Hello again
I have attached a Capture.
My public IP is 194.255.22.44, and I have a port forward of 5071 in my
router
The Raspberry Pi running the Kamailio is on 192.168.2.9 with an alias
192.168.2.40
My listening is setup like this
listen=127.0.0.1:5071
listen=eth0:5071 advertise 194.255.22.44:5071
alias=194.255.22.44:5071
Kamailio is forwarding an invite from a door phone thus I also rewrite FROM:
uac_replace_from("sip:"+$dbr(ra=>[0,1])+"@194.255.22.44:5071");
And the failure route to
$fu = "sip:"+$dbr(ra=>[0,0])+"@194.255.22.44:5071";
In the route doing the INVITE I also set this:
set_advertised_address("194.255.22.44:5071");
Regarding tcp_reuse_port, if I set this I get this error, which I
understand is due to the way TCP works.
Nov 4 18:38:41 scantronpbx /usr/sbin/kamailio[15864]: {1 ACK 16191 ACK
C2Az-Xm2b0CEPyV5eQuz7yEf9IJo4PyJ} WARNING: <core>
[core/tcp_main.c:1061]: tcp_do_connect(): binding to source address
192.168.2.40:5071 failed: Address already in use [98]
I do have tcp_reuse_port=yes with this capture. But much to my surprise,
the 200 OK from is send to 37148, but the ACK to it comes from 37150
-------------------- Med Liberalistiske Hilsner ----------------------
Civilingeniør, Kjeld Flarup - Mit sind er mere åbent end min tegnebog
Sofienlundvej 6B, 7560 Hjerm, Tlf: 40 29 41 49
Den ikke akademiske hjemmeside for liberalismen - www.liberalismen.dk
On 11/4/20 1:59 PM, Carsten Bock wrote:
Hi,
I think you are searching for this parameter:
http://www.kamailio.org/wiki/cookbooks/devel/core#tcp_reuse_port
It basically tells the kernel not to choose a new port at random for a
new connection, but it will try to reuse the existing port (in your
case 5071).
Thanks,
Carsten
--
Carsten Bock I CTO & Founder
ng-voice GmbH
Trostbrücke 1 I 20457 Hamburg I Germany
T +49 40 524 75 93-40 | M +49 179 2021244 I www.ng-voice.com
<http://www.ng-voice.com/>
Registry Office at Local Court Hamburg, HRB 120189
Managing Directors: Dr. David Bachmann, Carsten Bock
Am Mi., 4. Nov. 2020 um 12:07 Uhr schrieb Kjeld Flarup
<kjeld.flarup(a)liberalismen.dk <mailto:kjeld.flarup@liberalismen.dk>>:
Hello
I have a Kamailio running behind NAT, which sends calls to a VOIP
service provider.
I have setup the Kamalio to listen on port 5071, and also setup a
port
forward in the router.
Now the problem is that with TCP, 5071 is not used for the dialog,
but a
new port is chosen everytime. This means that when the mobile phone
called hands up, I never sees the BYE, because BYE is a new dialog.
To which port is the server supposed to send the BYE, and what field
tells the server this.
--
-------------------- Med Liberalistiske Hilsner ----------------------
Civilingeniør, Kjeld Flarup - Mit sind er mere åbent end min
tegnebog
Sofienlundvej 6B, 7560 Hjerm, Tlf: 40 29 41 49
Den ikke akademiske hjemmeside for liberalismen -
www.liberalismen.dk <http://www.liberalismen.dk>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users