Strange things are going on.
Next time, please send only one dump. under Linux, you can capture from both interfaces at the same time ("any").
To me, it looks like the call is beeing forked - one branch goues to the second cisco (correct) and one goes to the proxy again. Than, the looped request is again forked.
So, I think in your location database for sip:1006@10.0.0.54 are two entries:
sip:1006@10.0.0.54 and sip:1006@10.0.0.54@lima.dsi.crc.ca
the second one is looped to the same account and causes the forking like this: -- sip:1006@10.0.0.54 / - < - sip:1006@10.0.0.54 \ /
--sip:1006@10.0.0.54@lima...ca-<
\
-sip:1006@10.0.0.54@lima.....ca
solution: clean the user location entries.
regards, Klaus
Ticknor.Scott@ic.gc.ca wrote:
-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Wednesday, February 18, 2004 12:53 pm To: Ticknor, Scott: DGSE Cc: serusers@lists.iptel.org Subject: Re: [Serusers] eliminating 483 errors
Strange. You should watch the network traffic also on the loopback interface. (ethereal supports this). you can send me the dump file from ethereal.
klaus
thanks Klaus, here are the dumps.