try using a different source port for the outgoing side. i.e. use 2 ports in kamailio.
Regards,
David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337
On Mon, Oct 9, 2023 at 1:14 AM 城门 虾米 via sr-users < sr-users@lists.kamailio.org> wrote:
UA(192.168.0.11) received 183, then send ACK to 36.140.122.12(Kamialio public ip) not 192.168.0.2(kamailio internal ip), so Kamailio can't receive ACK.
this is my config,192.168.0.11 -> Kamailio -> Other SBC(public ip)
kamailio-ack-out-received.pcap https://1drv.ms/u/s!AkdU9Y6p5WVyjntDzMvkhGBHaJ1h this is capture packet
This question has been bothering me for a long time, help me
*发件人:* James Browne james@frideo.com *发送时间:* 2023年10月2日 12:03 *收件人:* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *抄送:* codenot@msn.com codenot@msn.com *主题:* Re: [SR-Users] Re: kamailio Behind nat. How Record-Route should be added ?
If you upload a packet capture, I'll look at it and try to tell you what's going wrong. This is certainly something that can work, and I always find that making a diagnosis with a packet capture is the root to the solution. It's going to be difficult for anyone to help resolve your problem without a code example, a trace, or a detailed description of the problem. If you start with a packet capture, then I'll try to help you. If you give me a sample of code, too, then it'll be easier for me.
James
On Thu, 28 Sept 2023 at 10:56, codenot--- via sr-users sr-users@lists.kamailio.org wrote:
i tried. but it does't work. modparam("rr", "enable_double_rr", 1) __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to sr-users-leave@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: