4 Nov
2009
4 Nov
'09
8:42 a.m.
have done that :)
it seems I have a loop somewhere and the shm is fastly out :(
Olivier
Daniel-Constantin Mierla a écrit :
hello,
do you have bit shared memory consumers? e.g., many records in user
location, lot of traffic... if yes, increase the shared memory size
via command line parameter: -m 128
The value is in megabytes.
Cheers,
Daniel
On 04.11.2009 13:04 Uhr, olivier.taylor(a)gmail.com wrote:
hi again,
now I get a ERROR:tm:sip_msg_cloner: no more share memory on
loose-route...
I must say GRRR ;)
Olivier
Daniel-Constantin Mierla a écrit :
Hello Olivier,
On 04.11.2009 12:25 Uhr, olivier.taylor(a)gmail.com wrote:
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
Hi Daniel, long time, I am on Kamailio(1.5) now
:)
not for long time :-) , 3.0 is around the corner...
ok, first of all, sorry I forgot the record-route :((
Now I have it, but the proxy doenst do anything when the Bye
arrives from the callee.
What action do I have to take if any?
You have to do loose_route() and if true then relay. The default
config file has sample routing of in-dialog requests (when to tag is
set).
Cheers,
Daniel
What I receive for the BYE:
BYE sip:997321079@xxx.xxx.67.183:5060 SIP/2.0.
Via: SIP/2.0/UDP yyy.yyy.123.88:5060;branch=z9hG4bK4dd17330;rport.
Route:
<sip:0485336302@yyy.yyy.123.83:5060;nat=yes;ftag=5672;lr=on>,<sip:xxx.xxx.67.183;lr=on;ftag=5672;my_param=AAAAAAAAAAAAAAAACgBUWFxPXVpFWhhVSzE4Mw-->.
From: <sip:0485336302@xxx.xxx.67.183>;tag=as3e2ef419.
To: "997321079" <sip:997321073@my.be>;tag=5672.
Contact: <sip:0485336302@xxx.xxx.123.88>.
Call-ID:
1257324791-1991-MacBook%20de%20Olivier%20Taylor(a)192.168.2.125.
CSeq: 102 BYE.
User-Agent: Phonext B2Bua.
Max-Forwards: 70.
Content-Length: 0.
Daniel-Constantin Mierla a écrit :
> Hello,
>
> On 04.11.2009 11:58 Uhr, olivier.taylor(a)gmail.com wrote:
>>
>> Hello,
>>
>> I use uac_replace_from to setup a call and everythings are ok.
>> When the caller send a Bye, no problem.
>> When the caller send a CANCEL, no problem.
>>
>> But when callee send a BYE to stop the call after the call has
>> been setup, the bye is never sent back to caller...
>> I also don't see any record-route header...
>>
>> Any idea?
>> What did I forget?
> if you do record routing and the bye from callee does not have it,
> then seems to be a broken UA at the callee side.
>
> Have you tried with different UAs?
>
> Cheers,
> Daniel
>