17 Oct
2005
17 Oct
'05
7:55 p.m.
Daniel-Constantin Mierla wrote:
Hello,
the appropriate mailing list for questions related to openser is
users(a)openser.org (http://openser.org/cgi-bin/mailman/listinfo/users).
Thanks for pointing out that.
I found a part of my problem, but I cannot explain it.
The phone (hard phone as well as a softphone) have been set to connect
to port 5062, but I see the registration still on 5060, where Asterisk
is running (on the same machine). The user 800000 has no account on
Asterisk, therefore the login fails there.
Any idea where this could come from?
bye
Ronald Wiplinger
Please see my comments inline.
On 10/17/05 11:44, Ronald Wiplinger wrote:
(It is my first try, .... I am sure I make
something wrong)
I have installed openser and it is now running for a while, ... today
I have added two users by:
export SIP_DOMAIN=voip.mydomain.com
openserctl add 800000 secret0 me(a)mydomain.com
openserctl add 800001 secret1 me(a)mydomain.com
first test:
openserctl ul show
Dumping all contacts may take long: are you sure you want to proceed?
[Y|N] y
===Domain list===
---Domain---
name : 'aliases'
size : 512
table: 0x2a96f6d120
d_ll {
n : 0
first: (nil)
last : (nil)
}
---/Domain---
---Domain---
name : 'location'
size : 512
table: 0x2a96f68f38
d_ll {
n : 1
first: 0x2a96f71180
last : 0x2a96f71180
}
...Record(0x2a96f71180)...
domain: 'location'
aor : 'admin'
~~~Contact(0x2a96f71298)~~~
domain : 'location'
aor : 'admin'
Contact : 'sip:601@vpbx.elmit.com'
Expires : Permanent
q : 1
Call-ID :
'The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything'
CSeq : 42
User-Agent: 'SIP Express Router FIFO'
received : ''
State : CS_SYNC
Flags : 128
Sock : none (null)
next : (nil)
prev : (nil)
~~~/Contact~~~~
.../Record...
---/Domain---
===/Domain list===
Here it says domain: 'location' that sounds for me not correct,
shouldn't it be voip.mydomain.com ??
It is ok, actually the 'location' is the name of the table (the name
of the field is a bit misleading).The sip domain should be visible in
aor, but you didn't use 'use_domain' parameter, so it is ignored.
I use than a hard phone and set it up, but it cannot log on, ... I
also do not see anything happen, when I use openserctl moni
What have I done wrong?
You can watch the network traffic while trying to register, there
could be something misconfigured. Use:
'ngrep -qt port 5060' on your sip server and send the output to me to
be able to give you more hints.
Cheers,
Daniel
BTW, I checked with serweb, and the user 800000 can login!