27 Jan
2004
27 Jan
'04
6:04 a.m.
I am trying to compile mysql.so 0.8.13-dev-23-merged
using: make all include_modules="mysql"
all other modules compile fine however mysql issues the below errors
which then go on and on
I have checked that "mysql.h" exists in the dir
`/root/srcprogs/SER/sip_router/modules/mysql'
Anyhelp please.
Thanks,
Dinesh
make[1]: Entering directory
`/root/srcprogs/SER/sip_router/modules/mysql'
gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall
-minline-all-stringops -malign-double -falign-loops -mcpu=athlon
-DNAME='"ser"' -DVERSION='"0.8.13-dev-23-merged"'
-DARCH='"i386"'
-DOS='"linux"' -DCOMPILER='"gcc 3.2"' -D__CPU_i386
-D__OS_linux
-DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP
-DDNS_IP_HACK -DUSE_IPV6
-DUSE_TCP -DDISABLE_NAGLE -DFAST_LOCK -DADAPTIVE_WAIT
-DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN
-DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL
-I/usr/local/include -I/usr/local/include/mysql
-I/usr/local/mysql/include -I/usr/pkg/include -I/usr/include/mysql -c
dbase.c -o dbase.o
dbase.c:33:25: mysql/mysql.h: No such file or directory
In file included from dbase.c:38:
con_mysql.h:33:25: mysql/mysql.h: No such file or directory
In file included from dbase.c:38:
Dinesh Mahbubani
The International Marketing Exchange Ltd.
Email: dinesh(a)imelhk.com
Tel: (852) 2541-2617
Fax (852) 2543-4537
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Joao Sampaio
Sent: Tuesday, January 27, 2004 1:57 AM
To: 'Atle Samuelsen'
Cc: 'serusers(a)lists.iptel.org'
Subject: RE: [Serusers] Sems
I'm sill working on this so I don't know if my conf files will work. But
I'm following the example on
http://iptel.org/~faqomatic/fom-serve/cache/92.html . Take a look.
João
-----Original Message-----
From: 'Atle Samuelsen' [mailto:clona@cyberhouse.no]
Sent: segunda-feira, 26 de Janeiro de 2004 17:47
To: Joao Sampaio
Subject: Re: [Serusers] Sems
btw, off the list:
How does your config look with the voicemail in ser? does it automaticly
redirect to voicemail after XX seconds?
if so. could you send me the needed in that config to get to work ?
- Atle
* 'Atle Samuelsen' <clona(a)cyberhouse.no> [040126 18:39]:
Hm
did'nt have that problem.. Tho.. have you checked your database that
your user 1001 has a e-mail address?
- Atle
* Joao Sampaio <est-j-sampaio(a)ptinovacao.pt> [040126 18:29]:
> Hello, thanks.
>
> I found my problem (till now!) which was a bad sems configuration
file.
>
> Now voicemail is responding to the calls but I always get the
message
> "Session rejected: 404 voicemail: no email
address for user <1001> "
on the
> caller phone.
>
> Did you have the same problem?
>
> Thanks
>
> Jo?o
>
>
>
> -----Original Message-----
> From: Atle Samuelsen [mailto:clona@cyberhouse.no]
> Sent: segunda-feira, 26 de Janeiro de 2004 17:22
> To: Joao Sampaio
> Subject: Re: [Serusers] Sems
>
>
>
> it looks like the same problem I had yesterday..
>
> If I did understand the README file, I think the sems CVS and SER
CVS
> works together but not SER no-Cvs + SEMS CVS.
this is because of the
> upgrade of the fifo buffer thing.
>
>
> - ATle
>
>
> .. here's my modified default config..
>
>
>
> # $Id: sems.conf.sample,v 1.11 2003/11/19 19:03:22 rco Exp $
> #
> # sems.conf.sample
> #
> # Sip Express Media Server (sems)
> #
> # sample configuration file
> #
> #
> # whitespaces (spaces and tabs) are ignored
> # comments start with a "#" and may be used inline
> #
> # example: option=value1, value2 # i like this option
> #
>
> ##################################
> # global parameters #
> ##################################
>
> # optional parameter: fork={yes|no}
> #
> # - specifies if sems should run in daemon mode (background)
> # (fork=no is the same as -E)
> fork=yes
>
> # optional parameter: stderr={yes|no}
> #
> # - debug mode: do not fork and log to stderr
> # (stderr=yes is the same as -E)
> stderr=no
>
> # optional parameter: loglevel={0|1|2|3}
> #
> # - sets log level (error=0, warning=1, info=2, debug=3)
> # (same as -D)
> loglevel=1
>
> # optional parameter: fifo_name=<filename>
> #
> # - path and file name of our fifo file (same as -i)
> fifo_name=/tmp/am_fifo
>
> # optional parameter: ser_fifo_name=<filename>
> #
> # - path and file name of Ser's fifo file (same as -o)
> ser_fifo_name=/tmp/ser_fifo
>
> # optional parameter: plugin_path=<path>
> #
> # - sets the path to the plug-ins
> # - may be absolute or relative to CWD
> plugin_path=/usr/local/lib/sems/plug-in
>
> # optional parameter: smtp_server=<hostname>
> #
> # - sets address of smtp server
> smtp_server=localhost
>
> # optional parameter: smtp_port=<port>
> #
> # - sets port of smtp server
> smtp_port=25
>
>
> ##################################
> # module specific parameters #
> ##################################
>
> # sample voicemail configuration (inline)
> config.voicemail=inline
>
> # optional parameter: announce_path=<path>
> #
> # - sets the path where announce files are searched for
> # - the file to be played is determined the following way:
> # <announce_path>/<domainname>/<username>.wav
> # if this file is not available <announce_path>/<default_anounce>
is
> # used
> announce_path=/usr/local/lib/sems/audio/
>
> # parameter: default_announce=<filename>
> #
> # - sets the name of the default announce WAV file
> default_announce=default.wav
>
> # parameter: max_record_time=<seconds>
> #
> # - maximum record time
> max_record_time=30
>
> # end of configuration section for voicemail module
> config.voicemail=end
>
>
> # sample announcement configuration (inline)
> config.announcement=inline
>
> # optional parameter: announce_path=<path>
> #
> # - sets the path where announce files are searched for
> announce_path=/usr/local/lib/sems/audio/
>
> # parameter: default_announce=<filename>
> #
> # - sets the name of the default announce WAV file
> default_announce=default.wav
>
> # end of configuration section for announcement module
> config.announcement=end
>
>
> # sample isdngw module configuration (external file)
> # config.isdngw=/etc/isdngw.conf
>
> # sample ivr module configuration (inline)
> config.ivr=inline
>
> #parameter: python_script_path=<full path>
> python_script_path=/etc/ivr
>
> #parameter: python_script_file=<filename>
> python_script_file=example.py
>
> # end of configuration section for ivr module
> config.ivr=end
>
>
> # sample conference configuration (inline)
> config.conference=inline
>
> # parameter: default_announce=<filename>
> #
> # - sets the full pathed name of the default announce WAV file.
> # Will be played to lonely users.
> default_announce=/usr/local/lib/sems/audio/first_participant.wav
>
>
> # end of configuration section for conference module
> config.conference=end
>
> # example configuration for number reader
> config.number_reader=inline
>
> number_path=/usr/local/lib/sems/audio/
>
> prolog_file=/usr/local/lib/sems/audio/welcome_to_number_reader.wav
>
>
epilog_file=/usr/local/lib/sems/audio/thanks_calling_number_reader.wav
>
> # end of number_reader configuration
> config.number_reader=end
>
> # add more module configurations here (inline or external):
> #
> # config.mymodule=<filename>
> # or
> # config.mymodule=inline
> # ...
> # config.mymodule=end
>
>
>
>
> * Joao Sampaio <est-j-sampaio(a)ptinovacao.pt> [040126 15:43]:
> >
> > Hello,
> >
> > I'm trying to install sems so that I can configure my ser proxy to
support
> > voicemail functions.
> >
> > I have downloaded the last CVS version of sems and I'm currently
running
> ser
> > version 0.8.12
> >
> > I got these error every time I try to start sems:
> >
> > Sems[12051]: Warning: /etc/sems/sems.conf:59 configuration:
ignoring
> > unknown parameter announce_path
> > Sems[12051]: Warning: /etc/sems/sems.conf:64 configuration:
ignoring
> > unknown parameter default_announce
> > Sems[12051]: Warning: /etc/sems/sems.conf:69 configuration:
ignoring
> > unknown parameter max_record
> > Sems[12054]: Warning: no configuration found for module
announcement,
> maybe
> > you want to specify config.announcement in config file.
> > Sems[12054]: Error: while loading plug-in
> > '/usr/local/lib/sems/plug-in/apps/announcement.so'
> > Sems[12053]: Warning: signal 17 received
> >
> >
> > Another question: Is ser 0.8.12 compatible with the last version
of sems
in
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
CVS?
Thank you very much.
Best reagards,
_______________________
Jo?o Sampaio
PT Inova??o, SA
SRM - Servi?os e Redes M?veis
email: est-j-sampaio(a)ptinovacao.pt
Tlf: +351 234511160-1907 / +351 234403421
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers