21 Oct
2005
21 Oct
'05
9:42 p.m.
Please post the debug messages from openser, those are relevant for your
problem. I do not know what is the error handling and meaning in sipsak.
Cheers,
Daniel
On 10/21/05 13:10, Ronald Wiplinger wrote:
Daniel-Constantin Mierla wrote:
On 10/21/05 12:17, Ronald Wiplinger wrote:
It has this line, ...
In sipsak I get now the error:
C:\Documents and Settings\user\My Documents\sipsak>sipsak-0.8.8.exe -C
sip:800000@vpbx2.elmit.com -a test000
-s sip:800000@vpbx2.elmit.com:5062 -Hvpbx2.elmit.com -vv
New message with Via-Line:
OPTIONS sip:800000@vpbx2.elmit.com:5062 SIP/2.0
Via: SIP/2.0/UDP vpbx2.elmit.com:3763;rport
From: <sip:sipsak@vpbx2.elmit.com:3763>
To: <sip:800000@vpbx2.elmit.com:5062>
Call-ID: 646310771(a)vpbx2.elmit.com
CSeq: 1 OPTIONS
Contact: <sip:sipsak@vpbx2.elmit.com:3763>
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.9_pre
Accept: text/plain
** request **
OPTIONS sip:800000@vpbx2.elmit.com:5062 SIP/2.0
Via: SIP/2.0/UDP vpbx2.elmit.com:3763;rport
From: <sip:sipsak@vpbx2.elmit.com:3763>
To: <sip:800000@vpbx2.elmit.com:5062>
Call-ID: 646310771(a)vpbx2.elmit.com
CSeq: 1 OPTIONS
Contact: <sip:sipsak@vpbx2.elmit.com:3763>
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.9_pre
Accept: text/plain
message received:
socket error: Connection reset by peer
bye
Ronald Wiplinger
Daniel-Constantin Mierla wrote:
Add log_stderror=yes in the configuration script and you should get
all the debug messages on the screen. Then watch when you send the
sip messages with sipsak. Hello Ronald,
please use the init.d script to start/stop openser. You can find
it in packaging subdirectory, there are directories for different
distributions and inside of some is a file named openser.init.
Otherwise try starting it from command line:
/usr/local/sbin/openser -f /usr/local/etc/openser/openser.cfg
I used openserctl start and it seems it is different.
With your line above I could start openser in debug mode, however,
there is still no log file about it.
During startup and shutdown many lines flashed through the screen,
as well during CTRL C to stop it. While I try to use sipsak, there
was no extra line on the screen either.
I use SuSE, which init script should I use?
You have to use "packaging/rpm/openser.init.SuSE" - copy it in
/etc/init.d and you can use it all the time from there. Since I am
not using suse, I hope you do not have anything to change inside the
file (e.g., paths or names).
Cheers,
Daniel
bye
Ronald Wiplinger
Cheers,
Daniel
On 10/20/05 16:44, Ronald Wiplinger wrote:
> Bogdan-Andrei Iancu wrote:
>
>> Hi,
>>
>> this is rather strange - can you post the error messages
>> generated by openser at startup?? (see syslog)
>
>
>
> With debug it DOES NOT START, no messages in /var/log/messages
> It hangs at the line:
> Starting OpenSER :
>
> Without debug the only message during startup is:
> Oct 20 21:41:00 vpbx /usr/local/sbin/openser[3882]: Maxfwd module-
> initializing
>
> bye
>
> Ronald Wiplinger
>
>> regards,
>> bogdan
>>
>> Ronald Wiplinger wrote:
>>
>>> Bogdan-Andrei Iancu wrote:
>>>
>>>> Hi Ronald,
>>>>
>>>> to find why your authentication fails, run openser in debug
>>>> mode (debug=7) and look into the logs for hints. If you have
>>>> doubts, just post the log.
>>>>
>>>
>>> Hi,
>>>
>>> with:
>>>
>>> debug=7 # debug level (cmd line: -dddddddddd)
>>> #fork=yes
>>> #log_stderror=no # (cmd line: -E)
>>>
>>> /* Uncomment these lines to enter debugging mode */
>>> fork=no
>>> log_stderror=yes
>>> /* */
>>>
>>> in openser.cfg openser does not start at all.
>>> The picture shows:
>>>
>>> vpbx2:/usr/local/etc/openser # openserctl start
>>>
>>> Starting OpenSER :
>>>
>>>
>>> Thanks for your help!
>>>
>>>
>>> bye
>>>
>>> Ronald Wiplinger
>>>
>>
>>
>>
>
>