Hi Klaus and Jiri,
I have compiled Free Radius server and Radius client, and installed them in the same machine with the Ser.
I check the Radius server by using Radius client, and it works file with the testing.
I read the folloing message from the RadiusHowto: "SIP Express Router can be configured to use RADIUS server for authentication, accounting, and group membership checking. Since configuration of RADIUS seems to be a common source of problems, we decided to put together this howto. "
My Question: If I installed the Free Radius server, is the acc module has been installed as well, How could I configure the Ser to create the CDR, is the CDR in the log file, or Can I create the CDR table in the Mysql DB?
Thanks for you help.
Regards
John
----- Original Message ----- From: "Klaus Darilion" klaus.mailinglists@pernau.at To: "Jiri Kuthan" jiri@iptel.org Cc: "John LI" john@signalc.com; "Serusers" serusers@lists.iptel.org Sent: Sunday, March 28, 2004 3:50 AM Subject: NAT traversal with redundant server (The problem when enable the MySql)
Do I have to start/restart ser after an IP takeover or is it somehow possible to configue the virtual IP address in advance so that ser uses this IP address as soon as it becomes available?
Klaus
Jiri Kuthan wrote:
At 01:29 AM 3/28/2004, Klaus Darilion wrote:
What do you mean by "tools"? For symmetric NATs, the proxy that sends
the request to the UA must have the same IP address as the proxy that received the REGISTER request - so I thought of using IP takeover (heartbeat) is the only way (except UAs which can register at multiple proxies). Is there any other way to solve this problem?
no, you need to take-over IP. There are different tools to achieve so,
hearbeat one
of them, VRRP another one and potentialy some more.
-jiri