Hi,
I was able to place the PBX with kamctl in the ul as contact. I see also, that 4 byte packets are transmitted to the PBX, but ...
unfortunately kamailio use for each outgoing call to the PBX the port 5060 as source. SIP can sort this out by the record and via entries and the callid. This is not possible with the 4 byte ka packets. The PBX awaits keepalives per call, else it terminates the call after arround 15 minutes.
I found no hint how to tell kamailio to use different source ports per call. Is there a way?
Else I have to send SIP ping, but they can not placed via kamctl, because I can not add all required fields.
How should I do the keepalive to the PBX per call in a transparent kamailio proxy?
Best regards,
Bernd
----- Ursprüngliche Mail ----- Von: "Daniel-Constantin Mierla" miconda@gmail.com An: "Bernd Krueger-Knauber" bkk@ednt.de, "Kamailio (SER) - Users Mailing List" sr-users@lists.kamailio.org Gesendet: Freitag, 17. Februar 2023 13:15:50 Betreff: Re: [SR-Users] Re: sendig 4 byte udp nat pings
Well, if you don't know the ip:port of the pbx and the pbx does not register ... but you should know something about the PBX, how do you send traffic to it and how do you trust the traffic from it?
On 17.02.23 12:39, Bernd Krueger-Knauber wrote:
Hi,
I don't think that your ideas are possible. I need to send the keepalive to the PBX on the same ip:port connection which is in use.
If I add something static, this will not work.
Am 17.02.2023 um 12:19 schrieb Daniel-Constantin Mierla:
On 17.02.23 11:44, Bernd Krueger-Knauber wrote:
Ok, one step further.
I need to use save() to add the phone as 'contact' when I get a REGISTER I get now keepalive packets to the phone, but ... I need them also to the PBX.
I can not add the PBX as contact, because it does not register. I think there is no possibilty to add a manual entry in the usrloc memory.
How can I also send the keepalive packets to the PBX?
Interconnect with a SIP system that does not register is usually done with dispatcher module, which can send keepalives as well. Or if you want to do with static rule in kamailio.cfg, look at keepalive module, maybe you can build the solution you need.
Adding a manual entry in the usrloc is possibe via rpc or directly to db table (for db only mode).
Cheers, Daniel
-- EDNT GmbH Werner-von-Siemens-Strasse 7 64625 Bensheim www.ednt.de
Registergericht: Darmstadt Registernummer: 24972
Geschäftsführer: Karlheinz Knapp