26 Oct
2011
26 Oct
'11
1:23 p.m.
Hello,
On 10/26/11 11:47 AM, Asgaroth wrote:
Hi Daniel,
On 26/10/2011 04:47, Daniel-Constantin Mierla wrote:
The 3.2 branch got it
just few moment ago. I will have to look over the
code a bit more, since I saw some threshold for probing module, I guess
was added by Carsten, which should be for inactive at this moment. Might
be a need for new state, like 'trying' to mark a gateway in transition
from active to inactive for those that don't want to inactivate it
immediately, but just after a specific amount of failures.
the purpose with three states (active, inactive
and disabled) was not
to relate probing to selection of gateways, as one may want to have
even active gateways in probing mode to detect when they go down. So,
in other words, if probing mode is not checked when a gateways is
selected, but only if the gateway has the state active.
OK, so, before I continue on testeing between 3.2 and 3.3 dev branch,
can you confirm that my understanding of the states are correct:
Assuming ds_probing_mode = 0 (Only send "ping" requests when
destination is in probing state)
AX (Active)
[*] Used by ds_select_* in gateway selection
[*] No ping probes sent to destination
AP (Active-Probing)
[*] Used by ds_select_* in gateway selection
[*] Ping probes sent to destination
[*] When reply to ping probe is recieved, state for gateway chages
to AX (Active)
IX (Inactive)
[*] Not used by ds_select_* in gateway selection
[*] No ping probes sent to destination
IP (Inactive-Probing)
[*] Not used by ds_select_* in gateway selection
[*] Ping probes sent to destination
[*] When reply to ping probe is recieved, state for gateway chages
to AX (Active)
DX (Disabled)
[*] Not used by ds_select_* in gateway selection
[*] No ping probes sent to destination
Is the above true for both version 3.2.x and devel branch?
Just for ease of syntax in routing script, is it possible to do:
ds_mark_dst("ip") = Mark Inactive-Probing
ds_mark_dst("ap") = Mark Active-Probing
in both version 3.2.x and devel branch? Similar to fifo ds_set_state
command?
I will look into it (just that I am not in the office these days, so it
may take a bit, or not, depending on how I find time for it).
Once I understand these correctly, I can continue testing the 2
versions and see the differences. I suspect v3.2.x does *not* use
gateway in ds_select_* when destination is in AP mode. But will
confirm that with testing if my above understanding is correct.
The goal is not to relate probing mode to selection of gateways, but
only to the fact of sending keepalives. Selection of gateways should be
based on state: active, inactive, disabled.
Cheers,
Daniel
Thanks
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda