Hi, I got SER from CVS head and it compiled well but my 0.9.4 config is not compatible with it like the nat_flag in registrar module does not support it anymore. It seems like I need to re-write the whole config just to make it work with the CVS head version. BTW what SER version did you compiled LCR in CVS head with? But according to Mr. Juha the latest LCR module is not compatible with 0.9.4 . Its my big problem. I want to retain my current SER 0.9.4 since for us it is working fine, and I just want to use LCR with the prefix capability since our gateway need prefix before sending them the request and time is my enemy. Any other comments or suggestions for me to accomplish this without much re-write of my SER configuration?
Thanks, Ryan
At 04:09 PM 6/19/2006, Greger V. Teigre wrote:
LCR for 0.9.x has not been completely updated with the latest features. The one found in experimental dir is the same version as the one you probably have. The reason is that the very newest LCR depends on some newer core stuff. I'm not sure about LCR for 0.10.x, but I just assume Juha has updated it as he is the maintainer. I checked out CVS head yesterday and LCR compiled fine.
CVS is not available in a tar ball yet; it's probably on Jan's task list. However, a more "qualified" version of 0.10 can be downloaded in the presence dir here: ftp://ftp.iptel.org/pub/ser/ (which is also where the tarballs should be available).
g-)
Ryan Pagquil wrote:
Hi Greger, I haven't tried the CVS version of SER but I tried both 0.9.6 and 0.9.4 but compilation of LCR failed. LCR in CVS should be compatible for earlier versions of SER? BTW how can I download CVS version of ser in tar archive?
Thanks, Ryan
At 02:57 AM 6/18/2006, Greger V. Teigre wrote:
Hi Ryan, Have you tried the cvs version of SER? Juha is responsible for maintaining lcr for both ser and openser, so they should both be updated. Right, Juha? g-)
Ryan Pagquil wrote:
Hi, I've been running it with no errors, but can't seems to register to it. I'm using my SER config (0.9.4) with radius authentication with OpenSer(1.0.1) and Openser doesn't seems getting me challenged, no radius auth error on the logs. Well actually I'm just trying Openser just because its LCR module has the prefix capability, but once I got the LCR from CVS head working I'll forget about it, I got alot of errors when compiling LCR from CVS to SER-0.9.4). Any help on both is greatly appreciated.
Thanks, Ryan ----- Original Message ----- From: "Steve Blair" blairs@isc.upenn.edu To: "Ryan Pagquil" rpagquil@philonline.com Cc: serusers@lists.iptel.org Sent: Friday, June 16, 2006 7:54 PM Subject: Re: [Serusers] SER to OpenSER
Check your openser log for error messages. There are some differences. The amount of change depends upon the complexity of your ser.cfg file. The errors are most likely syntax errors, path names for loadmodules and the use of return instead of break in openser land.
-Steve
Ryan Pagquil wrote:
Hi, What are the things I need to do to make SER config work with OpenSER? I got openser running but I can't register to it no error?
Thanks, Ryan
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- ISC Network Engineering The University of Pennsylvania 3401 Walnut Street, Suite 221A Philadelphia, PA 19104
voice: 215-573-8396 215-746-8001
fax: 215-898-9348 sip:blairs@net.isc.upenn.edu
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers