Re: [Serusers] Credentials with given realm not found

So Daniel like i understand the problem is my radius configuration, another thing is that my ATA sending the same stuff, i mean if i will change the sip server to different one where i installed freeradius with ser it's working fine. Daniel where i can start to fix that problem.? Thank you very much for your time. On 4/14/05, Daniel-Constantin Mierla &lt;daniel(a)voice-system.ro&gt; wrote: >The second REGISTER (the block 3) must contains the response to the >authentication challenge carried by 401 reply (block 2). That means that >the block 3 must contain an Authorization header with authentication >credentials computed according to HTTP-Digest authentication mechanism >(RFC2617). Also, see the section 22.Usage of HTTP Authentication in SIP >RFC3261 for more about user authentication in SIP. > >Daniel > >On 04/14/05 13:16, Alex wrote: > > > >>Sorry Daniel , i didn't get that, I send here 4 blocks, 1 one is the >>register request the 2 is the reply from the server, 3 is the register >>request, 4 is the reply from the server. If you can please point me to >>the problem. Because like i see the 2 register requests (1,3 blocks) >>are the same. >> >> >>On 4/14/05, Daniel-Constantin Mierla &lt;daniel(a)voice-system.ro&gt; wrote: >> >> >> >> >>>As you can see, the second REGISTER does not contain the authentication >>>credentials (No Authorization header) in response to 401 reply. So, >>>either you didn't configure the phone to authenticate or the Grandstream >>>HT286 1.0.5.18 is faulty. >>> >>>Daniel >>> >>> >>>On 04/14/05 12:35, Alex wrote: >>> >>> >>> >>> >>> >>>>Daniel thanks >>>>btw it's clean installation of Red Hat Enterprise Linux AS release 3 >>>>ser-08.14 , freeradius-1.2 , radiusclient-4.8 >>>> >>>>i am sending ngrep port 5060 >>>>i have here 2 requests of register and the replies to register. >>>> >>>> >>>>xxx.xxx.xxx.xxx - sipserverip >>>>telephoneip - ip where the call coming from >>>>Phonenumber - phone number >>>> >>>>-------------------------------------------------------------------------------------------------- >>>> >>>>U telephoneip:10739 -> xxx.xxx.xxx.xxx:5060 >>>>REGISTER sip:xxx.xxx.xxx.xxx SIP/2.0..Via: SIP/2.0/UDP >>>>telephoneip:10000;branch=z9hG4bK98514c3b052d7df6..From: "Test Alex" < >>>>sip:Phonenumber@xxx.xxx.xxx.xxx;user=phone>;tag=50673f1baca1958c..To: >>>><sip:Phonenumber@xxx.xxx.xxx.xxx;user=phone>..Contact: <sip >>>>:Phonenumber@telephoneip:10000;user=phone>..Call-ID: >>>>1cff1b8955b8fa5c@10.0.0.4..CSeq: 106 REGISTER..Expires: >>>>3600..User-Agent >>>>: Grandstream HT286 1.0.5.18..Max-Forwards: 70..Allow: >>>>INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Content-Lengt >>>>h: 0.... >>>># >>>>U xxx.xxx.xxx.xxx:5060 -> telephoneip:10000 >>>>SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP >>>>telephoneip:10000;branch=z9hG4bK98514c3b052d7df6..From: "Test Alex" >>>><sip:Phonenumber@xxx.xxx.xxx.xxx;user=phone>;tag=50673f1baca1958c..To: >>>><sip:Phonenumber@xxx.xxx.xxx.xxx;user=phone>;tag=b27e1a1d33761e85846fc9 >>>>8f5f3a7e58.f894..Call-ID: 1cff1b8955b8fa5c@10.0.0.4..CSeq: 106 >>>>REGISTER..WWW-Authenticate: Digest realm="xxx.xxx.xxx.xxx", nonc >>>>e="425e3ac34dc9509392435c11fb260f41420049c7"..Server: Sip EXpress >>>>router (0.8.14 (i386/linux))..Content-Length: 0..Warning: 392 >>>> xxx.xxx.xxx.xxx:5060 "Noisy feedback tells: pid=1912 >>>>req_src_ip=telephoneip req_src_port=10739 in_uri=sip:xxx.xxx.xxx.xxx >>>>out_uri=sip:xxx.xxx.xxx.xxx via_cnt==1".... >>>># >>>> >>>>U telephoneip:10740 -> xxx.xxx.xxx.xxx:5060 >>>>REGISTER sip:xxx.xxx.xxx.xxx SIP/2.0..Via: SIP/2.0/UDP >>>>telephoneip:10000;branch=z9hG4bK98514c3b052d7df6..From: "Test Alex" < >>>>sip:Phonenumber@xxx.xxx.xxx.xxx;user=phone>;tag=50673f1baca1958c..To: >>>><sip:Phonenumber@xxx.xxx.xxx.xxx;user=phone>..Contact: <sip >>>>:Phonenumber@telephoneip:10000;user=phone>..Call-ID: >>>>1cff1b8955b8fa5c@10.0.0.4..CSeq: 106 REGISTER..Expires: >>>>3600..User-Agent >>>>: Grandstream HT286 1.0.5.18..Max-Forwards: 70..Allow: >>>>INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Content-Lengt >>>>h: 0.... >>>># >>>>U xxx.xxx.xxx.xxx:5060 -> telephoneip:10000 >>>>SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP >>>>telephoneip:10000;branch=z9hG4bK98514c3b052d7df6..From: "Test Alex" >>>><sip:Phonenumber@xxx.xxx.xxx.xxx;user=phone>;tag=50673f1baca1958c..To: >>>><sip:Phonenumber@xxx.xxx.xxx.xxx;user=phone>;tag=b27e1a1d33761e85846fc9 >>>>8f5f3a7e58.f894..Call-ID: 1cff1b8955b8fa5c@10.0.0.4..CSeq: 106 >>>>REGISTER..WWW-Authenticate: Digest realm="xxx.xxx.xxx.xxx", nonc >>>>e="425e3acb812b5b2e8aa023e3fcffc618dc4cf661"..Server: Sip EXpress >>>>router (0.8.14 (i386/linux))..Content-Length: 0..Warning: 392 >>>> xxx.xxx.xxx.xxx:5060 "Noisy feedback tells: pid=1885 >>>>req_src_ip=telephoneip req_src_port=10740 in_uri=sip:xxx.xxx.xxx.xxx >>>>out_uri=sip:xxx.xxx.xxx.xxx via_cnt==1".... >>>># >>>> >>>> >>>>tell me if you need something else. >>>> >>>> >>>>On 4/14/05, Daniel-Constantin Mierla &lt;daniel(a)voice-system.ro&gt; wrote: >>>> >>>> >>>> >>>> >>>> >>>> >>>>>Could you post the network dump with REGISTER/401/REGISTER messages? I >>>>>will take a look to see if something is wrong. >>>>> >>>>> >>>>>On 04/14/05 12:16, Alex wrote: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>>Digest realm is the same for the register requests. >>>>>>furthermore the realm in To tag is correct. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>Did you mean To URI instead of To tag? >>>>> >>>>>Daniel >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>>what else it can be. >>>>>>Thanks for any help. >>>>>> >>>>>>On 4/14/05, Daniel-Constantin Mierla &lt;daniel(a)voice-system.ro&gt; wrote: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>Watch the network traffic (ngrep or ethereal on port 5060) and check the >>>>>>>realm from 401 is the same as the one from next REGISTER. Also, when >>>>>>>you use the empty realm parameter to radius_ww_authorize() and >>>>>>>www_challenge(), the realm is taken from To URI. >>>>>>> >>>>>>>Daniel >>>>>>> >>>>>>> >>>>>>>On 04/14/05 08:08, Alex wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>Hi guys maybe someone can find the problem, i still can't see anything >>>>>>>>going to radius authentication. (the radius logs are empty) >>>>>>>> >>>>>>>>the register request is coming but it's not going to authenticate >>>>>>>>through the radius. >>>>>>>>Any help will be appreciated. >>>>>>>> >>>>>>>>here is the debug from ser : >>>>>>>>--------------------------------------------------------------------------------------------- >>>>>>>>14(1036) parse_headers: flags=-1 >>>>>>>>14(1036) check_via_address(62.219.158.191, 62.219.158.191, 1) >>>>>>>>14(1036) DEBUG:destroy_avp_list: destroing list (nil) >>>>>>>>14(1036) receive_msg: cleaning up >>>>>>>>9(1012) SIP Request: >>>>>>>>9(1012) method: <REGISTER> >>>>>>>>9(1012) uri: <sip:xxx.xxx.xxx.xxx> >>>>>>>>9(1012) version: <SIP/2.0> >>>>>>>>9(1012) parse_headers: flags=1 >>>>>>>>9(1012) Found param type 232, <branch> = <z9hG4bKfc5751413c832e6d>; state=16 >>>>>>>>9(1012) end of header reached, state=5 >>>>>>>>9(1012) parse_headers: Via found, flags=1 >>>>>>>>9(1012) parse_headers: this is the first via >>>>>>>>9(1012) After parse_msg... >>>>>>>>9(1012) preparing to run routing scripts... >>>>>>>>9(1012) REGISTER: Authenticating user >>>>>>>>9(1012) parse_headers: flags=4 >>>>>>>>9(1012) end of header reached, state=9 >>>>>>>>9(1012) DEBUG: get_hdr_field: <To> [45]; >>>>>>>>uri=[sip:phonenumber@xxx.xxx.xxx.xxx;user=phone] >>>>>>>>9(1012) DEBUG: to body [<sip:phonenumber@xxx.xxx.xxx.xxx;user=phone> >>>>>>>>] >>>>>>>> >>>>>>>>9(1012) parse_headers: flags=4096 >>>>>>>>9(1012) get_hdr_field: cseq <CSeq>: <103> <REGISTER> >>>>>>>>9(1012) DEBUG: get_hdr_body : content_length=0 >>>>>>>>9(1012) found end of header >>>>>>>>9(1012) pre_auth(): Credentials with given realm not found >>>>>>>>9(1012) REGISTER: challenging user >>>>>>>>9(1012) build_auth_hf(): 'WWW-Authenticate: Digest >>>>>>>>realm="xxx.xxx.xxx.xxx", >>>>>>>>nonce="425e063022afc1142ed6730d46da41692ff3ed57" >>>>>>>> >>>>>>>>_______________________________________________ >>>>>>>>Serusers mailing list &gt;&gt;&gt;&gt;&gt;&gt;&gt;&gt;serusers(a)lists.iptel.org >>>>>>>>http://lists.iptel.org/mailman/listinfo/serusers >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>> >>>>>> >>>>>> >>>> >>>> >>>> >> >> >>