Interesting to know that some devices still can't handle sip spirals...
Cheers, Daniel
On 01/06/16 18:16, Mx R wrote:
Thanks Daniel
modparam("topoh", "mask_callid", 1)
It worked.
2016-05-17 17:53 GMT+03:00 Daniel Tryba <d.tryba@pocos.nl mailto:d.tryba@pocos.nl>:
On Tue, May 17, 2016 at 05:08:45PM +0300, Mx R wrote: > In our network we used several ONT Huawei models. But with one model > HUAWEI-EchoLife HG8245 / V1R003C00S205 we have the following problem. When > connecting to this device in the POTS ports of the two phones. From the > first port we can not call to the second and from the second port can not > call to the first port. On the other ONT Huawei devices, there is no such > problem. Earlier we had set OpenSIP and this device did not have a problem. > > The problem is likely in the configuration because it works at the default > settings. In the past I ran into other devices/PBXs that can't handle the fact there is an outgoing/incoming call with the same callid. You could try the topoh module (with modparam("topoh", "mask_callid", 1)) Beware that it might introduce other problems in some calls scenarios, my prefered solution is to route the call to a b2bua (asterisk) when I detected hairpinning. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users