23 Aug
2006
23 Aug
'06
2:12 p.m.
Hi,
here's the log:
Proxy-02: REGISTER 195.18.134.150:5080 <= 195.18.134.147:5060
(67512391(a)10.46.11.132>)
Proxy-02: sip:67512391@smartnet.no Authorization for
sip:67512391@smartnet.no (195.18.134.147) requested, challenging...
Proxy-02: REGISTER 195.18.134.150:5080 <= 195.18.134.147:5060
(67512391(a)10.46.11.132>)
Proxy-02: sip:67512391@smartnet.no Authorization OK...
Proxy-02: UAC behind NAT...
proxy-02 /usr/sbin/openser[13847]: -----db_load_urecord: AOR is
<smartnet.no>
proxy-02 /usr/sbin/openser[13847]: BUG:usrloc:db_load_urecord: AOR has
no @ while use_domain is enabled
Proxy-02: Register counter +1 ...
proxy-02 /usr/sbin/openser[13847]: -----db_load_urecord: AOR is
<67512391(a)smartnet.no>
Proxy-02: sip:67512391@smartnet.no
(<sip:67512391@10.46.11.132>;expires=300) save(location) OK...
br hw
ons, 23,.08.2006 kl. 12.39 +0300, skrev Bogdan-Andrei Iancu:
Hi Helge,
I was not able to reproduce the error neither with use_domain=1 nor with
use_domain=0.
(I was using the devel version).
actually the error is not DB related, but it's about the AOR the
db_load_urecord() function is receiving from the calling function - it
is called from only one place, from the get_urecord() function...
please try the attached patch...
regards,
bogdan
Helge Waastad wrote:
Hi again,
I have:
modparam("group|auth_db|usrloc|uri_db|speeddial|registrar|avpops|alias_d
b", "use_domain", 1)
In location table:
| username | domain |
| | |
| 123456 | smartnet.no |
| 654321 | smartnet.no |
If I set usrloc|registrar use_domain=0, the only thing that changes is
that the domain column is empty.
Br hw
-----Original Message-----
From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro]
Sent: 22. august 2006 18:06
To: Helge Waastad
Cc: Users(a)openser.org
Subject: Re: [Users] registered("location")
strange....
do you have the use_domain param enabled or disabled?
could you check if the location table has for "user" column the correct
format (all entries):
username@domain (if use_domain is on)
username (if use_domain is off)
regards,
bogdan
Helge Waastad wrote:
vanlig tekstdokument-vedlegg (usrloc.patch)
? modules/usrloc/.udomain.c.swp
Index: modules/usrloc/udomain.c
===================================================================
RCS file: /cvsroot/openser/sip-server/modules/usrloc/udomain.c,v
retrieving revision 1.23
diff -u -r1.23 udomain.c
--- modules/usrloc/udomain.c 4 Aug 2006 08:27:33 -0000 1.23
+++ modules/usrloc/udomain.c 23 Aug 2006 09:38:31 -0000
@@ -534,6 +534,7 @@
urecord_t* r;
ucontact_t* c;
+ LOG(L_ERR,"-----db_load_urecord: AOR is
<%.*s>\n",_aor->len,_aor->s);
keys[0] = user_col.s;
vals[0].type = DB_STR;
vals[0].nul = 0; Hi,
Ive just stopped my openser server,
deleted all entries in the location table and restarted the OpenSER
server.
Still i get the same:
BUG:usrloc:db_load_urecord: AOR has no @ while use_domain is enabled
message.
br hw
tir, 22,.08.2006 kl. 16.36 +0300, skrev Bogdan-Andrei Iancu:
>Hi,
>
>my guess is you had usrloc with use_domain and with contacts into the
>location table you switched use_domain on.
>BUG:usrloc:db_load_urecord: AOR has no @ while use_domain is enabled
>please remove the entire contact of the location table and try again.
>
>regards,
>bogdan
>
>Helge Waastad wrote:
>
>
>
>
>
>>Hi,
>>
>>I receive a
>>BUG:usrloc:db_load_urecord: AOR has no @ while use_domain is enabled
>>
>>in my syslog. Could this be the reason???
>>
>>br hw
>>
>>
>>
>>tir, 22,.08.2006 kl. 15.28 +0300, skrev Bogdan-Andrei Iancu:
>>
>>
>>
>>
>>
>>
>>>Hi Helge,
>>>
>>>it should work. Can you check if any db query is performed by the
>>>
>>>
function?
>>>regards,
>>>bogdan
>>>
>>>Helge Waastad wrote:
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>>Hi,
>>>>I'm just wondering if the 'registered("location")'
works when using
>>>>
>>>>
>>>>db only mode for usrloc?
>>>>
>>>>br hw
>>>>
>>>>
>>>>_______________________________________________
>>>>Users mailing list
>>>>Users(a)openser.org
>>>>http://openser.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>