Re: [Serusers] voicemail config

Hi Arnd, I have searched the archieves and I have found examples that I have implemented. I am running two instances of ser server with ser -f /ser.cfg and ser -f /voicemail.cfg. The respected conf fiiles are below. Now, when I call and after so many seconds my call is being redirected i get Call Failed: 404 Not Found and no voicemail turned on. Then i added that user to the grp table with serctl command like this serctl acl grant username voicemail. After I do that i get Hung up after i try to call that user. It rings for 20 seconds and then it justs hangs up. Any Ideas? # # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/group.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("group", "db_url", "mysql://ser:heslo@localhost/ser") # time to give up on ringing -- global timer, applies to # all transactions modparam("tm", "fr_inv_timer", 30) # ------------------------- request routing logic ------------------- # main routing logic route { if (!mf_process_maxfwd_header("10")) { log("LOG: Too many hops\n"); sl_send_reply("483", "Alas Too Many Hops"); break; }; if (!(method=="REGISTER")) record_route(); if (loose_route()) { t_relay(); break; }; if (!uri==myself) { t_relay(); break; }; if (method == "REGISTER") { if (!save("location")) { sl_reply_error(); }; break; }; # does the user wish redirection on no availability? (i.e., is he # in the voicemail group?) -- determine it now and store it in # flag 4, before we rewrite the flag using UsrLoc if (is_user_in("Request-URI", "voicemail")) { setflag(4); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # handle user which was not found route(4); break; }; # if user is on-line and is in voicemail group, enable redirection if (method == "INVITE" && isflagset(4)) { t_on_failure("1"); }; t_relay(); } # ------------- handling of unavailable user ------------------ route[4] { # non-Voip -- just send "off-line" if (!(method == "INVITE" || method == "ACK" || method == "CANCEL")) { sl_send_reply("404", "Not Found"); break; }; # not voicemail subscriber if (!isflagset(4)) { sl_send_reply("404", "Not Found and no voicemail turned on"); break; }; # forward to voicemail now rewritehostport("vm_host:5090"); t_relay_to_udp("vm_host", "5090"); } # if forwarding downstream did not succeed, try voicemail running # at vm_host:5090 failure_route[1] { revert_uri(); rewritehostport("vm_host:5090"); append_branch(); t_relay_to_udp("vm_host", "5090"); } //////////////////////////////////////////////// # # $Id: voicemail.cfg,v 1.2 2003/10/10 06:27:18 jiri Exp $ # # this script is configured for use as voicemail UAS; it processes # INVITEs and BYEs and asks SEMS to record media via "vm"; in this # script, all record-routing and other constructs known from proxy # scripts are not present -- it is a simple UAS # # ----------- global configuration parameters ------------------------ #debug= # debug level (cmd line: -dddddddddd) #fork=no #log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5090 children=4 fifo="/tmp/vm_ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/vm.so" # ----------------- setting module-specific parameters --------------- modparam("voicemail", "db_url","mysql://ser:heslo@localhost/ser") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; if (!uri==myself) { sl_send_reply("404", "not reponsible for host in r-uri"); break; }; # Voicemail specific configuration - begin if(method=="ACK" || method=="INVITE" || method=="BYE"){ if (!t_newtran()) { log("could not create new transaction\n"); sl_send_reply("500","could not create new transaction"); break; }; t_reply("100","Trying -- just wait a minute !"); if(method=="INVITE"){ log("**************** vm start - begin ***************** *\n"); if (uri=~"sip:1000@.*" || uri=~"sip:1001@.*") { if (!vm("/tmp/am_fifo", "announcement")) { log("couldn't contact announcement serve r\n"); t_reply("500", "couldn not contact annou ncement server"); }; } else { if(!vm("/tmp/am_fifo","voicemail")){ log("could not contact the answer machin e\n"); t_reply("500","could not contact the ans wer machine"); }; }; log("**************** vm start - end ******************\ n"); } else if(method=="BYE"){ log("**************** vm end - begin ******************\ n"); if(!vm("/tmp/am_fifo","bye")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer mach ine"); }; log("**************** vm end - end ******************\n" ); }; break; }; if (method=="CANCEL") { sl_send_reply("200", "cancels are junked here"); break; }; sl_send_reply("501", "method not understood here"); } On Monday, January 12, 2004, at 03:34 PM, Arnd Vehling wrote: Srbo Cvetkovic | CityNet, Inc. srbo(a)city-net.com | Pittsburgh, PA voice: 412.481.5406 | fax: 412.431.1315