my-IP is the IP of the SIP Proxy. I made an ngrep and I noticed that the URI of the ACK is the URI in the contact. The call was from client to PSTN-Gateway.
I rebooted the router of the client and all works fine now. Very interesting what you said about the RFC... I will check it. Thanks!!
Sebastian
----- Original Message ----- From: "Klaus Darilion" klaus.mailinglists@pernau.at To: "Sebastian Kühner" skuehner@veraza.com Cc: serusers@lists.iptel.org Sent: Monday, August 29, 2005 6:54 PM Subject: Re: [Serusers] ACK
Waht is "my-IP"? IP of caller or callee or SIP proxy?
The URI in the ACK is typically the URI in the Contact header of the 200 Ok message. Thus, the URI in ACK depends on call direction, and wheter the caller is a strict router (old SIP RFC) or loose router (RFC3261).
klaus
Sebastian Kühner wrote:
Hi!
I noticed a "phenomenon" that I don't understand:
I make accounting with ser. If all works fine, ser puts into the
database:
sip_method: ACK i_uri: sip:0182011542614xxxxxx@xxx.xxx.xxx.xxx:5060 (xxx.xxx.xxx.xxx = IP of PSTN-Gateway)
... and after the call, the BYE message reaches my server.
But sometimes, the ACK is logged in the database like this (in the most cases form users "far away"):
sip_method: ACK i_uri: sip:0182011542614xxxxxx@*my-ip*:5060
In this case, the BYE message doesn't reach my server.
Does anybody know what could be the reason and why ser logs the ACK from himself?
Many thanks!
Sebastian
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers